behind the intake manifold - near the firewall above the bellhousing
It is above where the starter goes cast on the block.if the motor is in you will have to remove the starter to see the #.
where is the engine number located on the 5.6L GMC engine.
The engine number on the Mitsubishi Lancer is located on the crankcase. After opening the hood, the engine number can be accessed on the driver's side of the motor just below the manifold.
On the front left of the block is where the number is located along with a two letter code that tells you what the motor is.
The engine serial number is located on the case under the oil filler neck. The engine number is located on the side of the sump. You may need to clean the area to read the number.
answer try above the starter motor on block of engine
It is located at the backside of the motor block. You will need to a mirror to see it less to remove the engine.
1988 F-250 351 Windsor oil pump is located in the oil pan . You will have to unbolt the motor mounts and jack the engine up slightly to remove the oil pan to gain access .
It is located in the engine block on the front of the motor. Its to the right of the oil sender and under the forward motor mount.
It is on the radiator side of the engine, behind the motor mount.
The Largest engine that will fit the motor mounts in a 1988 Ford Bronco is a 351 Windsor engine. You can get custom motor mounts and what not to fit any engine, but it takes some creativity and welding. I have a 460 engine in my 1988 Bronco, but it took quite the time to fit it in.
try looking on right side of engine,under the carbs,,,,but not positive