Ford Explorer
Ford Explorer XLT
Ford F-150

What could be the reason for a fuel gauge to stop working on a 1992 Ford Explorer?

202122

Top Answer
User Avatar
Wiki User
Answered
2008-01-02 06:55:43
2008-01-02 06:55:43

Fuel Level Sensor in the fuel pump. Replace the fuel pump. ------------------------------------------------------------------------------------------------------- A 1992 Ford Explorer has a 15 amp fuse in location # 17 for the fuel gauge Helpfull

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


fuel gauge stays on full and the tempreture does not move from cold on ford explorer 1998

The reason for the failure could be a failure in the connection or the gauge itself. Alternatively, the temperature sensor could have failed.

If the temperature gauge is not working, one thing it could be besides the gauge itself is a blown fuse. Another possibility is a loose or broken wire on the gauge.Ê

There are several reasons why a gas gauge could stop working. A short in the wire from the sending unit could be the culprit. The computer that controls the dashboard gauges could be going out.

The most common reason for a 1996 Chrysler Cirrus odometer and RPM gauge to stop working is a fuse. If the fuse is removed from the dash and replaced, often times the odometer and RPM gauge will begin working.

The brass float on my son's 1994 explorer leaked and had fuel in it causing to show empty all the time. We had to pull the fuel pump/sending unit out of the gas tank. Had to remove the gas tank to do this. ------------------------------------------------------------------------------------------------------------ A 1992 Ford Explorer has a 15 amp fuse in location # 17 for the fuel gauge according to my Chilton repair manual (Helpfull)

The gas gauge in the Eddie Bauer Explorer probably does not work due to a bad fuel sending unit. The sending unit is in the fuel tank in the same access area as the fuel pump.

One reason for a gauge not working is a broken part either in the fuel tank or between the fuel tank and the dashboard - keep looking

The oil pressure gauge in a 1999 Ford Explorer is ELECTRIC

If your gas gauge is not working on your 2000 Impala you need to take it in to a repair shop. There could be a fuse that needs to be replaced to prevent you from running out of gas.

It could be the fuse, but mine is because the floater that measures for the gauge is stuck.

It could be a faulty gauge, a faulty sensor, or a wiring problem. What engine do you have in what year car?

You temperature gauge could be not responding because of a faulty fuse. If you check your fuses and they work then you may have an electrical problem.

make sure that floating thing in the fuel tank is position right or working. The fuel gauge won't be working right if its stuck in one position. Hope that helps...

Bad fuse - I believe it is fuse # 17 - 15 amp for the fuel gauge on your 1994 Explorer bad sending unit - it's combined with your fuel pump inside the fuel tank bad wiring connection possibly the gauge itself

Ummmm, Radiator fans run off a temperature switch. Sometimes they put the fan switch and sender for the gauge together so I suppose it could be related. Have you checked to see if the wires are unplugged? Just a thought.

fuel guage number 2002 ford explorer

The dash lights on an Explorer are used to light the warning symbols and to illuminate the speedometer, gas gauge, and RPM gauge. These lights are controlled by fuses.

check the power to gauge and the temperature sensor (tps). if no power broken wire or short to ground. if power to both areas bad gauge.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.