answersLogoWhite

0


Best Answer

Past experience would suggest an alternator. This is symptomatic of a totally dead battery. Charge the battery first. Try to fire it up again and if it runs now put a voltmeter on the battery while it is running. If the voltage shows as 12v or LESS then it is NOT charging. A properly charging system will show at least 13 or more DC volts.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What could be wrong with a 98 Montero if it will start with a jump but dies as soon as the jumper cables are taken off?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you jump start a four wheeler?

jumper cables


How do you jump start a BMW 525i?

use jumper cables Moran


Why does the car only start when it gets jumper cables?

Bad battery.


How do you jump start a Pontiac Montana?

Jump starting a Pontiac include jumper cables and another vehicle with a battery. A person will need to put jumper cables on each car battery to jump start it.


What types of battery cables should one use when trying to jump start a dead battery?

Jumper Cables. If your battery has died, you may be able to use jumper cables to jump start it from some good Samaritan_Ü_s vehicle. If you can safely use jumper cables on your vehicle, make sure that the battery on the good Samaritan_Ü_s vehicle has at least as much voltage as your own.


How do you connect the battery to the coil to start a honda cd175 engine out of the frame and on the bench?

Just connect the battery to the motorcycle battery cables with jumper cables and then start it.


Your truck will not start unless you use jumper cables?

bad battery or bad charger.


Why can you start a car with a battery outside of the car?

Sure, connect it to the car with jumper cables.


How do you jump start a 1988 Honda Shadow?

Connect the bad battery to a good battery with jumper cables. Connect the positive terminals first, then the negative terminals. Now try to start the engine. When finished, disconnect the jumper cables in reverse order.


Why do jumper cables melt when trying to jump start a car even when they are hooked up correctly?

There its too much current running through them. If they are hooked up properly then you either have a short some where (positive wire that is touching ground) or the jumper cables can't handle the current demanded by the vehicle you are trying to start. If this is the problem, you need jumper cables that are a thicker gage wire.


Where to you put your jumper cables to jump start Lincoln LS 2002?

On the battery posts in the trunk.


How do you jump start a Volvo V70?

To jumpstart a car, firstly you need jumper cables. You will connect the jumper cables to the Volvos battery and connect the other end of the cables to another cars battery and give that car gas to help send a jolt to the Volvo.