0
What could cause a vibration and fluctuation of speed when reducing the transmission gearing in a 1999 Mitsubishi Lancer?
Wiki User
∙ 17y ago
a bad hanger bearing on your right front axle
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What is dampen?
In the case of automotive dampening, it is the process of reducing sound or the force of vibration.
What is being changed about the vibration to change the pitch and volume on the ukulele?
The vibration is changed by either reducing the length of the string (holding it down on a fret) or changing the tension of the string.
What are the ways of reducing sound wave transmission?
ultraveling waves
Bellows?
Expansion Joints are installed in the piping system to absorb vibration and shock. They also have the Advantage of reducing noise and compensating caused by misalignment.
Why you use nylock nuts?
Nylock nuts are used when there will be vibration in the joined pieces. The nylon forms to the contour of the thread reducing the chance that it will become loose.
Expansion Joints?
Expansion Joints are installed in the piping system to absorb vibration and shock. They also have the Advantage of reducing noise and compensating caused by misalignment.
What happens to particles in soundproofing?
The effect of soundproofing -- any means of reducing the sound pressure with respect to a given sound source and receptor -- on particles depends on the state of the particles. Soundproofing reflects or absorbs the energy of sound waves that transforms into vibrational energy, thus reduces the vibration and its resultant effects. For particles in the gaseous state, reduced vibration from soundproofing decreases the energy transferred to the free, widely-spaced gas molecules, thus lessening the resultant fluctuation in motion of the gas molecules. As for particles in the liquid and solid state, reduced vibration from soundproofing has a different effect on the particles. In liquids, energy of vibration transferred to the molecules are mostly absorbed by the intermolecular interactions and bonds (e.g., hydrogen bonding between water molecules). In solids, energy of vibration transferred to the molecules are absorbed by the chemical bonds between the particles of the solid. Thus, for both liquids and solids, soundproofing reduces the amount of energy absorbed by the particles.
Why are cat5 cables twisted?
The same reason telephone transmission wire pairs are twisted: to improve transmission by reducing noise pickup. See related question on twisted pairs.
What is the mechanism behind a foam cutter ?
the saw being of the type having an oscillating drive shaft and a counter weight that oscillates in opposing phase to the drive shaft for the purpose of reducing vibration.
What are the methods to improve the surge impedance loading of transmission lines?
By increasing Vr,Reducing in series inductance,increase capacitance
What Reduces Vibration In A Diesel Engine?
Several reasons for reducing the diesel engine vibration: 1- Adjusting valve timing. 2- Adjusting the injection advance angle. 3-Using a higher quality engine mountings rubber. 4-Using a turbocharger to improve the combustion efficiency. 5-Using a good quality P-Type nozzle injector. 6. Adjust the idle adjustor to decrease the vibration at the idling state. 7-Using pilot injection technology to decrease the combustion pressure thus the vibration & noise.
How can a skinsuit protect the body while running?
Skinsuits protect the body while running by enhancing muscle support and reducing muscle vibration. They also protect from UV rays and prevent scratches and abrasions.
