0
You would not normally use a belt with a single pulley. Belts are normally used to transmit kinetic energy between two or more pulleys in a mechanical system where it is desirable to transmit energy in a direction perpendicular to the axis of rotation of a pair of shafts. To transmit energy along a shaft's axis of rotation one would normally use a shaft coupler, or simply a longer shaft. For other angles a universal joint or flexible shaft is typical (depending on the angle and the amount of torque required).
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can you use belt and pulley in two wheelers?
It would depend on what you want to use the belt and pulley for
Why is a timing belt like a belt and pulley?
It is not like a belt and pulley. A timing belt is a belt and it fits on a pulley.
What type of pulley extractor do you use to remove the pulley from the front of the timing belt cover?
uj
How do you change 1993 Corvette crank pulley?
take off the belt, use a pulley puller to pull it then reinstall.
How do you change alternator belt on a 1998 Nissan maxima?
loosen the tension pulley bolt which is in the middle of the pulley, use a wrench, little work space is provided, just a little bit, then lossen the bolt that is behind the pulley, tho relive tension in the belt. take off the belt, and put on new one and tighten the bolt behind the pulley till belt is tight, then retighten the pulley bolt.
WHAT PULLEY DO I loosen to get single drive belt on?
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
How do you install an alternator belt on a 95 Grand Am?
Loosen the tensioner pulley. Put the belt around the alternator pulley and the tensioner pulley. Move the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley.
Belt changing belt on trailblazer?
You can change the serpentine belt on your Chevrolet trailblazer, by loosening the tensioner pulley. With the loosened tensioner pulley the belt will come off easily. Tighten the new belt with the tensioner pulley.
How do you change the serpentine belt for a 1995 Cadillac Sedan Deville?
Use a socket and ratchet and place on the 95 Deville's belt tensioner pulley. Pull to the side to release tension on the belt. Remove the belt and replace it, then lower the pulley back into place.
What is a tension pulley on a Pontiac Sunfire 2.2 L Engine?
tension pulley is an automatic tensioner that keeps the serpentine belt at the proper tension it is a single pulley that is smooth (no grooves) usually turning clockwise with constant pressure loosens pulley for belt removal use caution pulley is spring loaded
How do you replace the alternator belt on a 1997 Mazda Protege?
Turn the belt inside out. you need to get it under the power steering belt and to the other side of the pulley. You can use a crescent wrench to turn the pulley and get the belt under the other one. Turn the belt back right side out. loosen the alternator bolt and place the belt around the alternators pulley. Tighten the alternator bolt.
What is the path for the serpentine belt on the 01 Taurus?
should be a sticker on fan shroud Alternator, idler pulley, power steering, a/c, tensioner pulley, crankshaft pulley, water pump this is the order cant upload the picture but when placing the belt on if the pulley has the grooves in it the grooved side of the belt should face the pulley and if the pulley is smooth then the back of the belt faces the pulley
