What do you have to change in a 1998 Chevrolet S-10 when changing from a 22 ltr to a 28 ltr engine?
the only thing i can think of is the computer will still be giving gas for a 2,2 not a 2.8 so u may need a computer from a 2.8
You will want to remove the oil level stick and cap from the top of the engine. Then remove the drain plug from the oil pan on the bottom of the engine. Once completely empty, remove the oil filter. on a 4-cyl this is located in the front section of the engine. Easier to get to from above. Change the filter with a new one, replace drain plug, fill with oil. done.
Park the vehicle on a level surface. Drain the oil and change the filter. Add 4 quarts of the correct weight oil and start the engine. Let run for 30 seconds and shut down. Wait 30 minutes and then check the oil level. Add as necessary to reach the full mark. Do not overfill. You now know the capacity.
Where is the transmission located on a 1998 mystique Does the engine need to come out to change the transmission?
The engine compartment fuse box is located on the driver side of the engine compartment. The lid has the label for all of the fuses there, and one of the large square ones should be labeled ABS. I have a 1998 Cavalier and this is where it was located, but I sourced the info from the 1999 owner's manual online at http://www.extendedgmwarranty.com/owners-manual/chevrolet/1999-Chevrolet-Cavalier.pdf
If you have another light that says Check Engine, then the Service Engine Soon light means to change the oil/filter or perform some other maintenance item as listed in your owner's manual. You will see the other light when you turn on the ignition. If however there is no Check Engine light, this light means there is a problem with the emissions system.