Depends. If you are rebuilding the bottom end . Wiesco has a bottom end rebuild kit . I dont know how much . But if you are rebuilding just the top end . You can find top end rebuild kits for pretty low . About 90 dollars.
on the gas line between the gas tank and carb but it might not have one
You can run only gasoline with 5% Ethanol no more which means no E85.
you can use pretty much any unleaded gas but it runs a little better on 89 octane , or higher but if you have a stock blaster you can run 87 octane
6 speed or 6 gears how ever you want to look at it.
how to rebuild an 89 Dodge ram 50 (2.6 liter mitsibishi) carb
In most cases, the blaster is faster than the Ex, despite the Blaster having 100ccs less than the Ex, it is a 2-stroke which makes it more agile. Stock for stock, the blaster wins. With modded vehicles it could vary. For what I've seen, a full stock blaster is still faster than a slighty modded Ex. It also depends on the rider, too, and the way they shift. Year difference can matter too, like an 89 Blaster vs an 04 Ex, a 15 year old differnce means possible engine problems from age, and less speed. Basically, it depends on many different factors, and what you like to think. Personally Im a Yamaha guy so my thoughts are also torward the Blaster, but not entirely. It just all depends.
89 gerbil power
The cost to rebuild a transmission depends on what is put into the transmission and the people rebuilding it. In general, it can cost between $2,000 to $4,000 to rebuild a transmission for this car.
I would run a mix of 32:1 with 89 octane fuel.
seven inches from the top with the fork collapsed and the spring out
you cant adjust a drive belt, you problem is in the secondary clutch, I am sure you need to replace the sliding clutch and put a spacer in front of the hub.
bavarian auto recycling 800-726-4269 Ask for Ty