it helps control your idling from cold to warm up and when decelerating.as far as the time it takes-depends on engine size-i believe its a little quicker on a 2.0
instructions on how to install engine valve cover gaskets on l996 Mazda mpv van with 3.0 engine.
If you are talking about the IAC idel air control valve,It is as simple as disconnecting the electrical connector from the IAC valve.removing two mounting screws and remove the valve from the throttle body.Installation is reverse.Be sure to install a new O-ring. Good luck!
The idle air control valve is on the the bottom of the throttle body.
A check engine code 332 for a 1994 Mazda 626 means that the EGR valve's voltage is lower than it is expected to be. The ERG valve is part of your Mazda's emission control system.
The vacuum control valve releases pressure in the float bowl under hot driving conditions. See the links below for additional information.
The idle air control valve is located next to the throttle body. It is connected to the air cleaner hose on the top of the engine.
intake manifold tune valve control circuit B1
what is the valve clearance for the mazda b2500 engine
99 Durango doesn't have a Heater Control Valve, It only has a thermostat
The idle air control valve is also known as the idle speed valve. On a 1999 1.6 literÊMazda Protege, it is located at next to the throttle body.Ê
Where is the PCV Valve on a Mazda B2300 2003
Who is a valve calibration for mazda b2200 1988