Auto Parts and Repairs
Nissan Pathfinder
Crankshaft Sensors
Ford F-350

What does a cam position sensor do on a BMW 525I?

484950

Top Answer
User Avatar
Wiki User
2004-11-10 11:10:36
2004-11-10 11:10:36

It tells the ecm where #1 cyl is and when to fire the plug and the injector.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The 1996 BMW 328 camshaft position sensor is located on the front of the cylinder head. The camshaft position sensor should be labeled as such.

User Avatar

Cam position is taken from the distributor, there is no external cam sensor.

User Avatar

The cam position sensor signals the fuel injectors to inject. The crankshaft position sensor signals the spark plugs to fire.

User Avatar

Cam position is taken from the distributor on this vehicle, there is no separate cam sensor.

User Avatar

Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.

User Avatar

CMP= Cam Shaft Position Sensor.

User Avatar

The cam sensor is inside the distributor.The cam sensor is inside the distributor.

User Avatar

The 94 and 95 are the same,no cam sensor.1996 and 1997 are differant in one way.The 1996 and 1997 have a cam sensor. .The 97 has a cam sensor and the 94 does not.The 1996 has a cam sensor too.

User Avatar

the cam sensor is locate at the front of the engine.

User Avatar

The cam position sensor is attached to the distributor, under the distributor cap. It is held in place with two screws.

User Avatar

cam sensor senses position of cam .coil sensor operates coilboth 2 entirely different parts of engine

User Avatar

I would like to know where the cam sensor is on a 1999 pathfinder and is there one or they calling it a crank shaft sensor The cam shaft position sensor is located in the distributor.

User Avatar

Cam position is taken from the distributor, there is no separate sensor near the cams.

User Avatar

The 2003 Saturn L200 does not have a camshaft position sensor.

User Avatar

The earlier single cam M20 engine has 12 valves. All post >91 525's have 24 valve twin cam power units.

User Avatar

You locate cam-sensor check for loose or broken wires ,if this doesn't work replace cam-sensor.

User Avatar

Cam sensor, thats about it, there aren't any other names for that sensor.

User Avatar

Never heard of an "ignition sensor". Do you mean oxygen sensor, or maybe crank position sensor, or cam position sensor? There is an ignition "module" also... The oxygen sensor is on the exhaust manifold. The crank posiiton sensor is on the backside of the block. The cam position is on each head.

User Avatar

Cam position is taken from the distributor, there is no external cam sensor.

User Avatar

Cam position is taken from the distributor. There is no separate cam sensor.

User Avatar

There is no cam sensor on the 1995 year engine. GM. did not use a cam sensor on that year.

User Avatar

There is no such thing as a cam sensor valve. The camshaft position sensor is powered by the PCM, there is no individual fuse.

User Avatar

If you mean crank position sensor it's on the back of the engine, forward side. If you mean cam position sensor, that is taken from the distributor, there is no separate cam sensor.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.