answersLogoWhite

0

What does carb jet size number mean?

Updated: 10/19/2022
User Avatar

Wiki User

12y ago

Best Answer

The Higher the Jet Number the Bigger the hole init so more fuel goes into engine to make it richer, the smaller = vice versa less fuel means lean running.

some carbs a 120 means 1.20 mm diameter

but on Mikuni it is lm flow (milliliter) flows.

so depends on who makes carb.?

but yah bigger is more fuel

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does carb jet size number mean?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the standard main jet size of an aprilia rs 125 28mm carb?

120 main jet on a 28mm carb


What is main jet size in a suzuki GS550 carburetor?

if you have a 1979 1982 has an 80mm main jet the carb number is VN22SS i believe. I just snapped mine in half and im looking for one


What size jet do you need for a 2GC rochester carb SN 7028188?

#56 jets


How do you change main jet on a ktm 85 carb?

take off the carb. on the botoom of the carb is a bowl take screwsa out and the big jet in the center is the main jet. remove with a flathead screwdriver


What is the standard main jet size of a peugeot speedfight 2?

I just bought a size 72 upgrade as recommended. but when i opened up the carb guess what . it had a size 72 as standard. question answered.


How do you jet a 2008 yfz 450?

buy a jet kit and take the bowl off your carb and and put your jets in


What is the stock jet size for a Toyota 2E Carburetor?

primary jet size 105 secondary jet size 150


What is the correct fuel mix ratio for a 2007 KTM 125 motorcycle?

IMO, Ratio depends on the carb jetting and oil quality. Try 32:1 (gas:oil) using good synthetic or syn-blend then jet the carb. With stock jetting that should be in the ballpark. Higher altitudes will require leaner jetting (smaller jet size not different gas:oil ratio).


Briggs and Stratton keeps cutting off?

You may have clogged jet in the carb, or in the small fuel filter. Check everything from the tank down to carb, and if necessary take carb apart.


Where is the fuel filter located 1977 corvette?

From the factory, the fuel filter would be in the Q-jet carb. You have to disconnect the fuel line at the carb and remove that housing on the carb. Filter is inside.


Why does your motorbike keep cutting out when you start it?

try cleaning your carb your floats may be stuck or a plugged jet try cleaning your carb with carb cleaner and use a piece of wire to fit through your jets ...


What carb is oe on 1978 chev c10 with 305 auto?

Rochester 2-jet (2gc)