the fuel is pumped from the gas tank into the "fuel rail" and the gas stays there until you start turning over the engine to start it. the fuel injectors take the fuel from the "fuel rail" and spray it into the cylinder which then gets ignited by the spark from the spark plug. so if the injector is leaking or not functioning the fuel will just flood into the engine if leaking, or not go into the engine at at all if its not working. the reason they went from carburetors to fuel injection is so less gas is wasted because the injectors only spray a precise amount of fuel.
how many fuel injectors are in a Chevy cavalier
If the ticking sounds like a "normal" ticking, it is probably the fuel injectors.
how do i reinsert the fuel injectors on my 4.3 Chevy silverado
Been there before. The problem will be in one of the fuel injectors.
on the front of the engine runs the full length it has the injectors clipped on under it.just below the top pan.
How do you replace fuel injectors on 2003 Chevy blazer?Read more: How_do_you_replace_fuel_injectors_on_2003_Chevy_blazer
it could be your fuel pump relay. it should be located under the hood in a box marked fuses or relays.
Numerous things can cause a car to hesitate when trying to start. Almost always it has to do with the fuel delivery system. A dirty fuel filter, dirty injectors, worn fuel pump, fuel pressure regulator, etc. Most often the problem has to do with what kind of hesitation. With a 1998 Cavalier, I would start with the Injectors. STP???
Cars that have electronic fuel pumps, has to have at least 40 psi. This is true for all vehicles since the fuel injectors needs this much pressure to operate properly.
you need to replace the o-rings on your fuel injectors. i had the same problem on my cavlier
Both. It has fuel injectors and a throttle body.
i need to find location of fuel filter on 1993 Chevy cavalier