You need it to pull out the code. It will allow you the find the reason. Without a particular it's almost impossible to find the problem.
Disconnect the battery for couple minutes. But if you have problems with your engine or other monitored systems the light will go on again.
If you are referring to when the computer again can monitor the systems after a manual reset, it is usually between 50 and 100 miles.
Ask this question again as "How do you rebuild the engine in a 1994 Camry with _____ engine?" replacing _____ with the specific engine in your car.
Try changing your spark plugs, and your spark plug wires.
At 10am and closes at 9 Pm on sundays it opens at 11am and closes at 7pm
you need a new brake pressure differential switch
The engine needs fuel, compression and spark. You are missing one of those.
i have a toyota camry 92 model and i overfilled mu engine oil i just wanna know how i can get rid of the white smoke it was running like crap so i replaced the oil again and drained it to the right amount and replaced the spark plugs the motor is running fine again just smoking again what can i do
I had a similar experience. Toyota told me it was due to carbon in my throttle body which they cleaned for about $300 too much. However, they also replaced the engine computer while they were at it (under warranty). A coworker told me today thst they recently changed his engine computer due to a rough running problem. I believe Toyota has a widespread problem with their engine computers and they aren't acknowledging it (and passing some of their costs back to us). Soon you won't be able to tell them from Ford or Chrysler.
Just disconnect the battery, turn ign.key to step 2 for 5 sec. swich key to off again. connect the battery and turn on the engine and the engine errorlight will turn off.
You reset the check engine light with an OBD2 scan tool. But first you must repair the problem that caused it to come on. If not it will just come back on again. There is a problem that is effecting emissions.
Disconnect the battery for 5-10 minutes or use an error code reader (it has an option to erase codes). But if you have major problems with engine the light will come off again.