Want this question answered?
AM imply amplitude modulation of a carrier signal
A: A carrier carry information by modulation either Amplitude or Frequency modulation. Therefore AM and FM RADIO M stand for modulation
carrier
In a analog transmitter the RF carrier have to be modulated with the analog signal either by AM or FM where in digital transmitter the carrier is simply switched on and off a off = a zero and on = a one
Modulation Index is the ratio of the maximum deviation frequency to the frequency of modulation. In other words it is the ratio of the spread in frequency spectrum to the frequency that was used to modulate the carrier. For FM, modulation index is given by the formula mf= df/f where, mf=modulation index for FM df=difference in carrier frequency f=frequency of the signal
AM imply amplitude modulation of a carrier signal
fc>2fm
In amplitude modulation, modulation depth refers to the ratio of the unmodulated carrier amplitude to the amplitude deviation for which the modulated carrier wave reaches its minimum value. If this minimum value is zero, the modulation depth is 100%.For amplitude modulation,modulation depth = (a-b)/(a+b),wherea is the unmodulated carrier amplitude, andb is the minimum amplitude deviation.The modulation depth ratio is also referred to as the modulation index.
low level amplitude modulation occurs when the carrier signal is first modulated and then amplified,whereas in high level modulation,the carrier signal is first amplified and then is modulated.
A: A carrier carry information by modulation either Amplitude or Frequency modulation. Therefore AM and FM RADIO M stand for modulation
Analog modulationIn analog modulation, the modulation is applied continuously in response to the analog information signal.Common analog modulation techniques are:Amplitude modulation (AM) (here the amplitude of the modulated signal is varied) Double-sideband modulation (DSB) Double-sideband modulation with unsuppressed carrier (DSB-WC) (used on the AM radio broadcasting band)Double-sideband suppressed-carrier transmission (DSB-SC)Double-sideband reduced carrier transmission (DSB-RC)Single-sideband modulation (SSB, or SSB-AM), SSB with carrier (SSB-WC)SSB suppressed carrier modulation (SSB-SC)Vestigial sideband modulation (VSB, or VSB-AM)Quadrature amplitude modulation (QAM)Angle modulation Frequency modulation (FM) (here the frequency of the modulated signal is varied)Phase modulation (PM) (here the phase shift of the modulated signal is varied)
In amplitude modulation, modulation depth refers to the ratio of the unmodulated carrier amplitude to the amplitude deviation for which the modulated carrier wave reaches its minimum value. If this minimum value is zero, the modulation depth is 100%.For amplitude modulation,modulation depth = (a-b)/(a+b),wherea is the unmodulated carrier amplitude, andb is the minimum amplitude deviation.The modulation depth ratio is also referred to as the modulation index.
FM stands for frequency modulation. The definition is: when the frequency of the carrier wave is changed in accordance with the intensity of the signal, it is called frequency modulation. In frequency modulation, only the frequency of the carrier wave is changed in accordance with the signal. However, the amplitude of the carrier wave remains unchanged.
No. The carrier "carries" the modulation. The modulation is the intelligence.
angle modulation is called non linear modulation because the information is stored in phase of the carrier signal
Frequency modulation and Phase modulation
A phase modulation