When looking at aÊmedium power microscope, the cell nucleus looks like a black spot or a darker oval in the cell. Using a high power will let you see a little more detail such as areas of light and dark chromatin.
vacuum tubes, large sized, high power dissipation, high voltagestransistors, medium sized, medium power dissipation, low voltagesintegrated circuits, small size, medium power dissipation, low voltagesmicroprocessors, very small size, low power dissipation, low voltages
General Purpose Medium Power NPN Transistor
pneumatics are used only in low power applications hydraulics are used in medium to high power applications.
It depends on the program you are using. If you are using PSAT for academic study, then your data have to be in m-file after conversion from simulink. If you are using commercial program like NEPLAN, then your data have to be in nepprj file. A NEPLAN data can not be used in PSAT program unless you have a measn to do the conversion. to properly run optimal power flow (OPF), make sure your power (load) flow runs. Then input your objective functions on generator being used or load. The objective function is determined like a*P^2+b*P+c, where a, b, and c are constants and P is the real power being generated. Same applies to reactive power pricing. So, all you need do after you set up power flow is to model your objective function this way. Some programs also model objective function as volatage var or loss. But all has cost modeling also as objective function. With this set up, your OPF program will run. hope this answers your question.
cache
it is 50 on my microscope.............................
vision and brightness of the light
There's LOW, MEDIUM, and HIGH power.
The high power objective in a microscope is the largest lens in the microscope.
The lower power objective for the microscope is the small lense on the microscope. The size usuall ranges at 4x on the microscope.
high power objective
A) a long power objective- shortestB) a high power objective- longerC) a oil immersion objective- longest
The magnification of the microscope
The high-power objective magnifies the image 4x.
The power of a microscope magnification is the eye piece power times the objective lens so 10X eye piece times 10X objective is 100 power Common eyepieces are 10x 15x, 20X. The limit is about 2000X in an excellent unit. Average practical use is about 1000X to 1400X In expensive scopes the higher power objective lenes as 100X are made from oil not glass.
When working with a microscope you should always take procauctions but one question I am asked a lot is When working with a microscope do you open or close the diaphram when working with the medium- and high-power objective nobs? The answer is you keep it open if you don't you won't be abler to see any thing.
refers to the power of a microscope;calculated by multiplying the power on the objective by the power on the eyepiece?