That comes up when you cycle the key on,off,on,off,on and it does a self test. "done" means that there are no trouble codes found.
A heater blower in a 2005 Chrysler Pacifica is a complicated process. To get this [project done, you will have to go to a mechanic and have it done.
If done correctly, no.
Take it to a dealer to program if it is not done properly the system will lock up.
JUST HAD BBOTH DONE IT COST $1336.OO
done it many times as a medical transportation driver,yes
It is done displaying codes in the odometer.
drop serp belt come up through sub frame one bolt in the back and you are done
Timing can not be adjusted, is done by the PCM.
Good Luck! Just had this done by Chrysler mechanic, took him 7 hours labor and cost me over $700. Brilliant engineering by Chrysler.
You don't. You do not have a machine to remove the tire from the wheel. You also do not have a machine to balance the tire once it is installed on the wheel. This should only be done in a shop equipped for this.
Yes it can be done in vehicle.Yes it can be done in vehicle.
P0202 is injector number 2 circuit open. P2074 is map sensor TPS correlation. P0108 is map sensor circuit high. With all three codes I would think the wiring harness has been pinched or damaged near the rear valve cover, driver side.