Want this question answered?
bosch
on the bac and on the botom
The Hydraulic Control Unit for the 1995 Ford Ranger 4 wheel anti-lock brake system 4WABS is located in the engine compartment on the left front inner fender panel. It consists of: the brake pressure control valve block, pump motor and hydraulic control unit reservoir. The "brains" of the 4WABS in the Ranger is the Brake Control Module, or Electronic Control Unit (ECU). The ECU/Brake Control Module is mounted in front of the right front corner of the battery on the radiator support.
ECU = Engine Control Unit
Behind a panel in the drivers side footwell if it's RHD.
yes, a friend of mine put a 4.0 in an 83 ranger 4x4. make sure you have ecu and harness if the 4.0 is fuel injected.
The ECU is located inside the passenger compartment under the console where it fits up against the dash.
It is called the ECU, (Engine Control Unit)
Either behind the factory radio or under the passenger side kick panel
This indicates the ECU has detected a fault with the engine. Ford will charge one hour labour to read the ECU and tell you what the fault is. What are the other symptoms? You could figure it out and save yourself some money
Hello The Galaxy 1.9 tdi Ecu is located behind the instrument panel, under the bulb failure control module.
Should be on firewall, should have a couple harnesses plugged into it