http://wiki.answers.com/Q/Toyota_rav_4_maint_required_light_2008"
Maint. required light want reset.
How do you reset maint read light on 2010 corolla
read your owners manual
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
free video instructions go to www.vehix411.com ................turn the power button on, make sure the odometer is on actual mileage2) turn the power off3) hold in the odometer button (in the center of the dash) while pressing the "power" button twice.4) watch the odometer display for dashes that are flashing, after the dashes are gone, the odometer reads 000000.5) release the odometer button the maint. required light will be off now
The maintenance required light requires a scan tool to be reset.
Unplug or replace maint. timer
To reset the "Maint Req'd" light on a Toyota Camry, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off, and when you restart the car, the maintenance light should be reset. If it doesn't turn off, repeat the steps.
A scan tool is required.A scan tool is required.
hold the milerage button(make sure it was not on Trip A or Trip B) while turn the key from off to igition position.
"Maint Req" stands for Maintenance Required - oil change, transmission fluid addition, brake fluid, battery check, tire pressure, brake pads, etc. Check your owners manual for the car to see what's required and how often.