According to www . motorcraft . com ( no spaces ) For the 2000 Ford Ranger with the 3.0 L flex fuel engine Motorcraft part numbers for ( fuel pump and hanger with sender ) PFS 121 - with 112 inch wheelbase PFS 122 - with 118 inch wheelbase PFS 123 - with 126 inch wheelbase
According to the Owner Guide and fordparts.com : Motorcraft FG-991 , is the fuel filter required for a 1999 Ford Ranger 3.0 liter flex fuel engine
No - motorcraft.com lists 2001 Ranger 3.0 L fuel pumps for flex fuel and gas only 3.0 L engines
With the 1999 Ford Ranger 3.0 liter flex fuel V6 engine you can use " regular " unleaded gasoline 87 octane or ( E 85 ethanol fuel ) or any combination of the two fuels
On a 2000 Ford Ranger : The electric fuel pump is INSIDE the fuel tank It is installed through an access hole on top of the fuel tank
Should be on the Filter Accumulator or somewhere in the line close to it.
The 2000 Ford Ranger was equipped with two different 3.0L 6-cylinder options between codes 'U' and 'V' (Flex-Fuel). Both engines have a coolant service fill of 14.8 quarts.
cylinder 5 misfire
Yes it can be bypassed using a Flex Fuel Replicator from two companies. Here are the websites:www.tandselectronics.com ORwww.Point A Engineering.com.The better buy is at Point A Engineering. Free shipping and 100% Guaranteed with NO restocking fee.
For a 2000 Ford Ranger : All the different engines came from the factory with a 50 / 50 mix of distilled water and GREEN colored antifreeze ( meeting Ford specification ESE-M97B44-A ) * 2.5 / 3.0 FFV / 4.0
how do you change a fuel filter and were is it located on a 2000 xlt ford ranger
Actually , it has a TIMING CHAIN
If you have a 1999-2000 Ford Ranger with a flex-fuel sensor it is located just under the driver side door on the inside of the frame and the fuel line coming from your fuel filter goes right to it. You unplug it then remove the fuel line on both sides of it and re-install the new one.