conditional formatting
I should shave differently in the summer.
Percentages are entered as decimals. For example 12% is entered as .12. You can format a cell to display the contents as percent, if you like.
What part of this task I should have done differently?
No. You should look to the FX-9860GII for a graphing model that has Natural Input AND Natural Output on it's display.
It is up to you to decide. You may go for 'void' return type, which means no return value.
it is in the very front of the book, real easy
You should display an all around white light.
Hold down the LEFT button next to the multi-function display for a couple of seconds. The display should now start flashing. Press the Left button briefly to scroll through the display options and the RIGHT button to change the currently flashing item.
Monitors serve to display what is inputted on a computer. There are various types of monitors, but you should choose the one that is best for your vision.
Yes. He should be.
Those questions should be answered differently because they were friezed differently.
1. Turn key to position 2. Keep in mind position 1 will turn on radio, but position 2 will illuminate the warning indicators on the dash. 2. Service due or past due will display. You still need to cycle thru the display and bring it up again. Cycle to the mileage indicator and then press the up or down arrow until the service due / past due is displayed 3. Press and hold the reset button. This is the black stick on the dash used to reset the odometer and to dim the dash lights. 4. A message will display "to reset, press and hold for 3 seconds". Release the black stick then press and hold it again for 3 seconds. 5. Indicator should reset and tell you the next service A or B is due in XXX miles. 6. Print this out and put in the glove box so you don't have to search the web for the solution again. That will not work. Here is the working-solution: How to reset service indicator on Mercedes Benz C280 2006 1- Begin the process by turning the ignition key to the no. 1 (On) position. 2- Push the system selection buttons until "Kilometre reading" appears on the multi-function display. 3- Push the dimmer knob ("R" button) three times; you should hear a beep and voltage should read out on the multi-function display. 4- Turn the ignition key to the no.2 (Run) position. 5- Push the forward/back scroll buttons until "Service display" appears on the multi-function display. 6- Push the dimmer knob ("R" button) once; "Oil type" should appear on the multi-function display. Use the +/- buttons to select the oil type that was added to the engine. 7- Push the forward/back scroll buttons until "Confirm oil reset, press R button for 3s" appears on the multi-function display. Push the dimmer knob ("R" button) in and hold it for three seconds; "Service confirmed" should appear on the multi-function display. 8- Push the forward/back scroll buttons until "Service display" appears on the multi-function display. 9- Push the system selection button until "Kilometre reading" appears on the multi-function display, then turn the ignition key to off position.