You can overpressurize seals, or wash bearings out. Never oil fill a engine because of it. If you engine is over full, get a drain catch pan, and take some oil out. Remember, its always easier to put oil in, than it is to take it out.
too much oil in the engine will cause of airation and will create too much pressure to your engine and will damage the headgasket.
u will blow your engine oil seals, causing an oil leak and damage to the engine.
It can cause engine damage.
putting too much oil in any engine is not good... the oil can over flow to your spark plug... that can cause stall..
when you put too much oil: engine will lose much power oil push out and make damage your catalic converter
It can build up too much pressure and blow seals, it will smoke, not a good idea to overfill your oil.
It can build up too much pressure and blow seals, it will smoke, not a good idea to overfill your oil.
You drain out the excess. Too much oil is just as bad as too little. Both will cause engine damage.
It will blow out the engine seals.
Too much oil can cause engine damage. Remove the excess oil and only fill it to the full mark.
Too much oil can cause severe engine damage. For that reason drain out the excess immediately.
The oil will make contact with the crankshaft. This will create a froth of oil mixed with air. This is a poor lubricant and will cause severe engine wear.