I have the HID headlights for low beam and the halogen lights for high beams. The halogen lights also serve as daytime running lights. I noticed one day that the running lights weren't working and the high beams weren't either. I traced the problem to the light bulb socket--seemed one of the connectors in the socket had gotten hot and melted the socket. I replaced the socket (passenger side) and both started working (evidently they are wired in series). After about 7 months I noticed them off again. I looked and the same socket (passenger side) had melted again. I went to the auto parts place and bought a "heavy duty" socket and replaced it again. After 1 year they are both still working.
I have the exact same issue on our 1996 ES300..My suspicion is that it is indeed the switch
The oil pressure switch on 1992 Lexus es300 is located just besides the engine.
I'd be suspicious of the dimmer switch or a wiring connector between the dimmer switch and the headlights.
remove ignition switch 92es300
How change ignition switch in Lexus ES 300
Where is the fuel cut off switch located in a 2003 Lexus es300
Radio in 1990 Lexus LS400 stopped working, possible answer?
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
the switch is usually located in the tranny near where the shift linkage goes into the tranny
measure the wndow and whatever the size is go to the window shop and if they have the right size then it is complete
The job is very simple. The problem is the difficult access. You have to get behind the steering column.
My 1995 lexus es300 high beam is not working tune it on is not working, i check the fuels and is good. Is any one know what the problem is?