Check the water hoses, disconnect these and check for bolts on the firewall.
Remove the center switch console. remove the 4 spring clips holding the square heater motor housing and remove the housing. Inside the heater motor housing Remove the two spring clips holding the heater motor in Remove wiring connections and then remove the heater motor. Install new heater motor and installation is in the reverse order of above.
remove the four nuts in the engine bay on the heater box near where the heater core hoses enter. Drain coolant remove the hoses and pull the heater box out from the inside of the car. Remove clips holding heater core, than put your new one in.
first you will have to remove your heater hoses going to your motor to the firewall take them off at the firewall, then there is a big box on your firewall, there is a bunch of screws holding it on remove them you heater core will be inside it.
the heater core, heater core hoses or heater control valve is leaking
If it is leaking inside the car, the heater core has failed.If it is leaking inside the car, the heater core has failed.
Check inside the car undre the dash , check the heater core.
No, the inside temp is controlled by a temp door inside the heater box.
The heater valve is located inside the heater box.
The heater core is a small radiator inside the car under the dash that hot water circulates through to heat the inside of the car.
behind the glove compartment inside the heater assy
broken heater motor but where is heater motor inside from?
From the inside. you have to unbolt heater box