This may not be correct, but metal/plastic is a special plastic like fiber that is even stronger then metal and lighter, too
Metalized Biaxially-oriented polyethylene terephthalate (BoPET). Commonly known by the brand name Mylar.
Plastic.. Depends what type, but plastic pipes are made from plastic. :)
no, plastic is made out of oils usually petroleum.
what is done to plastic material in the plastic factory
Is plastic a Matter
The bag itself will take centuries if not longer to break down as it is a layered metalized plastic material.
2.2
a sheet pf polyester applied to melted metal
It is also available in silver and bronze.
There are two ways; 1) Plastics can be metalized on the surface by the process of vacuum metalizing, in which metal filaments are vaporized on to the plastic surface and the condensed in a vacuum chamber. 2) Sputtering, the metal is ionized in a vacuum chamber by an electrical discharge between two electrodes, a metallic cloud forms inside the chamber and fogs the plastic parts with a thin layer of metal .
Metalized was created in 1986-08.
Metalized Biaxially-oriented polyethylene terephthalate (BoPET). Commonly known by the brand name Mylar.
Radiant barriers can be repaired by using various radiant barrier laminate polyester treatments to become metalized.
Metalized Films can cause problems with GPS and radio broadcasts. A non Metal Film can be safe to use with GPS systems.
A metal film capacitor is an electrical part that holds energy electrostatically inside of an electric field. The capacitor has a dielectric which separates two electrical parts which are made out of thin film.
A metal film capacitor is an electrical part that holds energy electrostatically inside of an electric field. The capacitor has a dielectric which separates two electrical parts which are made out of thin film.
The "classical" material for a mirror is a glass sheet with a thin metal film on the back. Some bike mirrors may well use this combo. But due to concern for shards and splintering metalized plastic is also used. It would be possible to use metals like aluminum, and polish them to a mirror like finish, but that process if more expensive and unlikely to be found on a bike mirror.