0
It ends up being about 361 ci
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Torque specs 350?
what are the piston footpounds for a chevy 350 If you're asking about the output of the engine, it varies a lot depending on what the engine was built for.
What do you measure to determine your engine size?
The total volume (displacement) of all of the cylinders. Such as 350 CI means 350 cubic inches.
Which is better 350 hp 400 tq or 400 hp 350 tq both engines being 425 wt?
350 hp 400 tq hp means nothing it is just what the engine is rated at. torque is the actual measure of power
What is the horsepower difference between a 1997 305 Vortex engine and a 350 vortex?
Try a search for vortec engines
What is the difference between a long neck and a short neck water pump on a 350 engine?
easy answer is... Can you stick your finger between the timing cover and the back of the water pump?? no= short yes= long
What size is a 350 bored 60 over?
a Chevy 350 bored .060 over would be 360.4 cubic inches
I thought a Chevy 350 bored 060 over was a 383?
No a 383 is a 350 with a 400 crank. A 350 bored 60 over is 361 cubes.
What is the timing for 1973 Chevy 350 bored 060 over?
10 degrees with a stock cam
What is a Chevy 350 engine bored 30 over called?
355
What is a 350 bored 4.00 over?
its called nothing because you wouldn't have a ENGINE left if you bored it 4" over
Is a 355 engine a 350 bored out?
Yes. That would be a 350 bored .030" oversize.
How many cubic inches is a 350 small block bored 060 over?
If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )
What is the size in cubic inches of a Chevy 350 bored 060 over with 350 crank and 400 heads?
Why 400 heads? They are notoriously bad flowing heads without much modification the engine would be about 360 cubic inches, but the heads have nothing to do with the size of the engine.
What cid is a 350 Chevy bored to 4.0625?
Depending on the piston type you are running, you would bore .030, .060, .090. Or, .020, .040. At .030, you come out to 355. So, at .060, 360.
350 engine it is bored 0.60 over what is the cid now?
360.42 Cubic inches. Math people. Pie (3.14) times the radius (stock Chevy 350 bore is 4.00, .060 over is 4.060, radius = 2.030) squared. Multiply by stroke, stock 350 is 3.48 in. then multiply by 8.
What is a 350 Chevy bored 060 over called?
4.06(bore)/2=2.03(radius)*2.03=4.1209*3.14159(pi)=12.94617(square inches)*3.48(stroke)=45.0527*8(# cylinders)=360.4216cu.in. Most engine manufacturers round up, so this would be a 361.
What is a Chevy 350 engine bored 060 over called?
It's exactly 360.42 Cubic InchesStock Stroke is 3.48 60 over is 4.060 BoreTo make a 383 stroker you need a 3.75 inch stroke crank, and 4.030 BoreActual displacement is 382.67 Cubic Inches
