A bit shift is a bitwise operation in which the bits in a value are shifted left or right.
A logical shift moves bits left or right. After a left shift, the high-order bit is lost while a zero is inserted in the low-order bit. After a right-shift, the low-order bit is lost and a zero inserted in the high-order bit. The left (<<) and right (>>) shift operators are binary operators; the first operand is the value being shifted, the second operand is the number of bit positions to shift. Thus x << y will left shifts all the bits of x by y bit positions.
With a logical shift the vacated bits are always filled with zeroes. With an arithmetic shift, a left shift will fill vacated bits with zeroes but a right shift fills the vacated bits with a copy of the most significant bit.
There are several types of shift registers: PISO: parallel-in serial-out shift registers such as the 7495(?), 74HC165, 74HC166 serial parallel counter load a one and shift it out serially bingo sequential pulses SIPO: serial-in parallel-out shift registers such as the 74HC595, 74HC4094, TPIC6595, TLC5925. Typically data is shifted into the register one bit at a time through "the" input pin. Most "POV clocks" and "POV displays" use such chips to drive the spinning LEDs. Most such chips can be wired up to "shift left", or they can be wired up to "shift right", but once wired up can only do one or the other. bidirectional SIPO: bidirectional serial-in parallel-out shift registers. Once wired up, an external control line can dynamically switch it from "shift left" -- feeding in a new bit on the "least significant bit input pin" -- and at some other time it can "shift right" -- feeding in a new bit on the "most significant bit input pin". "universal" shift registers, such as the 74AC299, can do any of the above (at different times): output the current state of the register in parallel, shift left, shift right, and load the new state of the register in parallel.
12
One jk flip-flop with j=k=1 should be added to the system so that it's modulus becomes 16 instead of 8.
A logical shift moves bits left or right. After a left shift, the high-order bit is lost while a zero is inserted in the low-order bit. After a right-shift, the low-order bit is lost and a zero inserted in the high-order bit. The left (<<) and right (>>) shift operators are binary operators; the first operand is the value being shifted, the second operand is the number of bit positions to shift. Thus x << y will left shifts all the bits of x by y bit positions.
a little bit.
With a logical shift the vacated bits are always filled with zeroes. With an arithmetic shift, a left shift will fill vacated bits with zeroes but a right shift fills the vacated bits with a copy of the most significant bit.
Shift right preserves the sign by preserving the sign-bit (leftmost bit):10>>1 returns 5-10>>1 returns -5Zero-fill shift right sets sign-bit to zero:10>>>1 returns 5-10>>>1 returns document.write(-10>>>1); 2147483643
Instead of being filled with all 0s, as in logical shift, when shifting to the right, the leftmost bit (usually the sign bit in signed integer representations) is replicated to fill in all the vacant positions (this is a kind of sign extension).
9, 8 to shift the bits in & 1 to move the byte into another register.
There are several types of shift registers: PISO: parallel-in serial-out shift registers such as the 7495(?), 74HC165, 74HC166 serial parallel counter load a one and shift it out serially bingo sequential pulses SIPO: serial-in parallel-out shift registers such as the 74HC595, 74HC4094, TPIC6595, TLC5925. Typically data is shifted into the register one bit at a time through "the" input pin. Most "POV clocks" and "POV displays" use such chips to drive the spinning LEDs. Most such chips can be wired up to "shift left", or they can be wired up to "shift right", but once wired up can only do one or the other. bidirectional SIPO: bidirectional serial-in parallel-out shift registers. Once wired up, an external control line can dynamically switch it from "shift left" -- feeding in a new bit on the "least significant bit input pin" -- and at some other time it can "shift right" -- feeding in a new bit on the "most significant bit input pin". "universal" shift registers, such as the 74AC299, can do any of the above (at different times): output the current state of the register in parallel, shift left, shift right, and load the new state of the register in parallel.
12
You do not have to be an "Indian" (Native American) to do that, your teacher should tell you this.
You can have a bit more control with the manual, when pulling away for example. Put him in second and gradually apply a bit of acceleration.
8
Shift registers contain multiple "flip flops" that can be set to represent a bit value (0 or 1). These values can be retrieved later and so the registers can function as memory.