The B.O.O. switch or Brake On/Off switch is located at the top of the brake pedal assemble.
you ask it to stop
The brake lite switch is right over the brake petal. It faces the driver. If you have Cruise on the truck, that switch is in the same spot. It will have a hose running off it. The brake lite switch only has wires.
Brake Light switch works without the ignition on. unplug the brake pedal switch and check to see if the brake lights are still on..switch could be defective
Near the top of the brake pedal pendulum is a push-switch when the brake pedal is moved this switch will trun the brake lights on and off.
your brake switch is either broken or out of alignment look above the brake pedal in your vehicle and make sure the switch is not hanging. The switch has to be closed to turn the lights off.
On most vehicle the brake switch is one way to shut the cruise off.
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.
brake light switch at the top off your brake pedal the little rubber bumber is worn out or the switch is out.... very easy fix
# Bad brake light switch (on top of the brake pedal under the dash), or; # A shorted turn signal switch.
brake light switch is bad
Check the brake light switch. It should be mounted on the upper part of the brake pedal or the brake pedal frame. If the brake lights go off when you unplug it you have a stuck or shorted switch.