"header" is a beam (usually at least 2 2x6's) above the door in the wall to keep the weight from above from pushing down on the door and making it inoperable. the header sits on jack studs on each side of the doorway. they take the weight from above
Remove the door and window handles then all of the screws you can find then with a special tool, remove the retiners around the sides and bottom of the door. When all is loose, pull out on the bottom and push in on the top then lift to disengage the door. Go to the following website. It will show how to remove the door panel. http://www.kwmuth.com/techsupport/pdfs/21000790.pdf
I have a 2002 Accent. May work on other models. The tools you will need: A #2 Phillips head screwdriver. A Standard head screwdriver. First take out all of the screws in the door panel. There is one in the handle that opens the door, and 2 in the door panel handle. Use the flat screwdriver to pop off the covers. Taking out the door handle is a little tricky. Slide it towards the front of the car and pull out. You might not get it the first try. Once you get the handle out enough, you will be able to see 2 metal rods connecting to it(towards the back of the car). Using the standard screwdriver, pull the plastic piece(either blue or red) towards you and it should unclip from the rod. Next, pick up on the rods and they should come out of the handle. Once all screws and the door handle are removed, you can take off the panel. To remove the door panel, simply pull it off, starting at the bottom of the door and prying your fingers between the panel and the door. You will hear a series of pops. You didn't break anything. If it doesn't come fairly easy, don't pull too hard. You may have missed a screw. Once the panel swings freely on the window slot, get it close to the door and pick up, as the top rests in the window slot. If you have power windows, you will have to unclip the wires going to the switch.
over the door decorations go over the door stupid!!!
A flush door has panels that are mostly flat and take up the entire space of the door. A panel door has loose fitting panels that fit into grooves that make up the frame of the door.
Somehow you set off the antitheft system. In order to reset it you have to unlock the drivers door with the key.
Head for the Door was created on 2004-11-30.
The Head on the Door was created on 1985-08-26.
Once you get in the castle, head through the door in front of you if you have the key from Bowser in the basement. Go upstears through the door. Go to your right & head through the door. If you have Luigi then you can get the flower on the column & head through the miror. You can choose 3 ways: Jump in Wario's picture, Head through the door, or head back. A star is in the door in the miror.
A line spoken by Gir on the show Invader Zim in the episode Door to door, in the words of Gir I love dis show JOIN OPERATION HEAD PIGEONS ON FACEBOOK
The 2nd bear head can be found in the Neighborhood - on the door to a house
Your a crack head
It is behind the drivers head back wall by door opening
It is a shrunken head that is hanging above his table. Avove the door is a human skull, but it looks like the shrunken head is above the door at one point. All you can see the the hair of the skull hanging down.
== ==
If you are in pain after, seek immediate medical advise.
pearl door earl ear
The cast of Through the Door - 2012 includes: Brittany McKeithan as Head Nurse