it is in the fuse block and is used to protect the fuel pump and wiring to the fuel pump from being overloaded and melting or catching fire by detecting to much current and blowing (melting) before the wire harness or pump does.
Most fuses that would have to do with the fuel system will be in the under hood fuse box.Most fuses that would have to do with the fuel system will be in the under hood fuse box.
The AM2 fuse controls the starting system as well as the fuel injection system. This fuse is also connected to the discharge warning system and the airbags.
yes the fuel injector relay is the same as the fuel pump relay.
On a 1997 Ford Explorer : In the Power Distribution Box ( which is " live " ) located in the engine compartment ( maxi fuse # 3 is a 20 amp fuse for the fuel system , anti-theft system )
Remove the fuel pump relay or fuse and crank the engine until it stalls..................
find correct fuse for 2003 Toyota Camry XLE for ignition system
In order of probablility: fuel filter, fuel pump fuse, fuel pump, fuel pump relay, control system.
IMPORTANT: Do not skip the fuel system pressure release step. Injury and other damage can result!Safety Step! Relieving Fuel System Pressure· allow engine to cool· relieve fuel system pressure· put on your eye protectionBefore you begin the job of replacing your fuel filter, you must relieve the pressure in your fuel system. A fuel injection system operates under very high pressure. If you don't release this pressure before you start unscrewing fuel lines the result can be explosive. Do this before you attempt to change the fuel filter.To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter.Now that you've relieved the fuel pressure you can remove the old fuel filter.If you didn't do this yet, you must go to the previous step and do it. Very dangerous!Where is the fuse box and or the relay on 95 suzuki sidekick
Pull the fuel pump relay in fuse box under hood and try to start car.
AnswerWith the engine running, pull fuse #1, the fuel pump fuse. Let the engine run out of gas.
were is the fuse for the fuel pump
= Relieving Fuel System Pressure = To release the pressure in your fuel lines (and fuel filter) you'll need to locate the fuel pump fuse in the fuse box. If you don't have a fuel pump fuse, find the relay that operates the fuel pump. Once you've found the fuel pump fuse or relay, start the car. With the engine running, pull the fuse or relay out. If you pulled the right one, the engine will quickly die. Since it's using all of the pressurized fuel in the system, the fuel lines won't be pressurized when you crack the fittings on your fuel filter. Now that you've relieved the fuel pressure you can remove the old fuel filter. If you didn't do this yet, you must go to the previous step and do it. Very dangerous!