K&N or AEM will work just fine.
what is the timing sequence on a 1994 Mitsubishi ecipes 2.0 leader no turbo??
Yes it can.
be more specific!!
I have 1994 Mitsubishi eclipse and have no spark i change cam and crank sensor but still no have spark can be icu
On a 94 Turbo DSM there is no crank angle sensor. The Cam Angle Sensor(CAS)serves the function of both a crank and cam sensor, and it's located on the passenger side of the valve cover at the end of the intake camshaft, you can't miss it.
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
r-134
1342 no 1 is near the belts on engine
The recommended gap is .044"
check your exhaust it could be you cadilidic converter Have someone read the codes that are set. The codes will help lead you to the problem.
Yes, "A" 1994 mitsubishi eclipse transmission will fit a 1992 mitsubishi eclipse, IF and only IF it's the right one 6 bolt fits 6 bolt and a 7 bolt fits a 7 bolt. Make sure you know Fwd and Awd and if it's 5 speed =)
yes, but you have to change the wiring harness to accept the engine, but yes, it can be done. If you do not have the right wiring harness, you would burn up the turbo