Want this question answered?
If the vacuum pump is on, the water will continue to boil. If the vacuum pump is off as the vessel is sealed, the boiling will stop at a point of equilibrium.
the function of air vessel is to accumulate excess quantitiy of water flowing in the suction pipe or delivering pipe compressing the air inside the vessel
In a boat: when the hull is filled with too much water and the vessel is riding too low in the water. The bilge pump will pump the water out. Water can get in the hull through minor cracks or seaspray coming in through the top of the deck
Buckets. In particular, you can use a bucket chain.
You should by a service manual from the parts store where you get the water pump for step by step instructions and photographs.
changing the water pump is quite involved. I recommend a manual. The BGB is expensive, but is well worth it.
for pressurized light water reactor type, as an example, the nuclear reactor components are * Reactor vessel (that contains the nuclear fuel and surrounded with water and contains control rod for power control and for safety) * reactor coolant pump * steam generator * reactor pressurizer * piping out of the vessel to the pressurizer, from pressurizer to steam generator, from steam generator to reactor coolant pump, and from pump back to the reactor vessel.
The diagram for a 2000 Stratus water pump and cooling system is in the Dodge Stratus service manual. The manual can be purchased through most auto parts.
Ballast used to be stones. With the invention of the electric pump, I think most ships will actually pump water into and out of tanks to adjust their ballast now.
get a repair manual at auto zone for 24.99.
tools and knowledge (or a manual)
look in the manual