0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why armature winding resistance is less than field winding resistance?
An 'armature winding' is the rotor winding, and the 'field winding' is the stator winding.
What is armature in DC motor?
The armature has the stationary (not physically moving) magnetic field, which attracts the magnetic field in the rotor. Since DC does not alternate, a split ring is used to alternate the current (and resulting magnetic field), so that the rotor will spin.
What are the parts of a direct current generator?
there are many parts of a dc generator armature, field coil, yoke, body, rotor and commutator.
How the generator and motor works ALTERNATING CURRENT GENERATORS BASIC AC GENERATORS Regardless of size all electrical generators whether dc or ac depend upon the principle of magneticinduction.?
An emf is induced in a coil as a result of (1) a coil cutting through a magnetic field, or (2) a magnetic field cutting through a coil. As long as there is relative motion between a conductor and amagnetic field, a voltage will be induced in the conductor. That part of a generator that produces the magnetic field is called the field. That part in which the voltage is induced is called the armature. Forrelative motion to take place between the conductor and the magnetic field, all generators must have two mechanical parts - a rotor and a stator. The ROTor is the part that ROTates; the STATor is the part that remains STATionary. In a dc generator, the armature is always the rotor. In alternators, the armature may be either the rotor or stator. ROTATING-ARMATURE ALTERNATORSThe rotating-armature alternator is similar in construction to the dc generator in that the armature rotates in a stationary magnetic field as shown in figure 3-1, view A. In the dc generator, the emf generated in the armature windings is converted from ac to dc by means of the commutator. In the alternator, the generated ac is brought to the load unchanged by means of slip rings. The rotating armature is found only in alternators of low power rating and generally is not used to supply electric power in large quantities.
Why field winding work as stator and armature winding as rotor?
No, these can be switched depending on the requirements of the application. It is more practical to have the armature windings (since they will carry the full load current) as the stator for this will require larger wires and is also easier to cool if kept stationary. The field windings do not carry the full load current of the load so this requires smaller wires and smaller slip rings since this is the piece that will rotate.
What does a armature or rotor do?
The Armature(or rotor) is a electromagnet inside a motor and alters the magnetic field inside the motor when it rotates. In DC motors it is connected to a Commutator. In AC induction motors the armature isn't connected to a power source.
Why the induction motor does not have armature reaction?
Because the armature (or rotor) has no external connection. The currents that produce torque from the rotor are induced by the magnetic field in the machine, so there is no commutator, no brushes and no armature reaction.
Does armature rotates?
Typically the armature windings are in the stator of a generator, which does not rotate. Typically the field windings are on the rotor, which rotates.
Why armature winding resistance is less than field winding resistance?
An 'armature winding' is the rotor winding, and the 'field winding' is the stator winding.
What is difference between armature and rotor?
rooter is start of (R)and armature is start of (a) ...........Written By................................................ ...........Prof....Guffar sb (Snath Jesoriya)IET
What is armature current?
Armature current is the current flowing in a motor's armature. The "armature" is another name for the coil (or coils) of wire which are on the motor's "rotor", which is the part that rotates inside its stator. (The "stator" is the fixed, non-rotating part of the motor.)
What three things are required to produce EMF in an alternator?
armature, stator, rotor
What is armature in motors?
The armature has the stationary (not physically moving) magnetic field, which attracts the magnetic field in the rotor. Since DC does not alternate, a split ring is used to alternate the current (and resulting magnetic field), so that the rotor will spin.
What is armature in DC motor?
The armature has the stationary (not physically moving) magnetic field, which attracts the magnetic field in the rotor. Since DC does not alternate, a split ring is used to alternate the current (and resulting magnetic field), so that the rotor will spin.
What is mean by rotor in machines?
a ROTOR is basically any part of a machine that rotates. eg the armature in a motor a STATOR is the part of a machine that is stationary. ie the ROTOR revolves within the STATOR
What is inductor alternator?
The armature and the field windings of an inductor alternator are both accommodated in the stator. The three phase ac armature windings are distributed in small slots and the dc field windings are concentrated in two slots in the stator. Each field coil spans half the total number of stator slots. Armature coils are connected in star and field coils are connected in series. The rotor resembles a cogged wheel, with no winding. The core of the stator, which is completely embraced by the field coils, will retain a residual magnetism if excited once. When the rotor is rotated, the passage of the rotor teeth alternatively under the field offers a varying reluctance path for the flux produced by the field coils. This flux, which varies periodically, links with the armature coils and induces an emf in them. The frequency of the induced emf depends on the speed of the rotor. The magnitude depends on the speed of the rotor as well as on the level of excitation. The armature and the field windings of an inductor alternator are both accommodated in the stator. The three phase ac armature windings are distributed in small slots and the dc field windings are concentrated in two slots in the stator. Each field coil spans half the total number of stator slots. Armature coils are connected in star and field coils are connected in series. The rotor resembles a cogged wheel, with no winding. The core of the stator, which is completely embraced by the field coils, will retain a residual magnetism if excited once. When the rotor is rotated, the passage of the rotor teeth alternatively under the field offers a varying reluctance path for the flux produced by the field coils. This flux, which varies periodically, links with the armature coils and induces an emf in them. The frequency of the induced emf depends on the speed of the rotor. The magnitude depends on the speed of the rotor as well as on the level of excitation.
What are the parts of a direct current generator?
there are many parts of a dc generator armature, field coil, yoke, body, rotor and commutator.
