a ballistic galvanometer is a specially designed galvanometer suitable for measuring the total quantity of electricity or charge displaced by a varying current of short duration such as charging & discharging of a capacitor >>>>
Moving coil galvanometre is a device which is used to detect current in a curcuit.
In bridge construction dead load, live load, and dynamic load must be considered. Dead load is the weight of the bridge itself. Live load is the moving weight on the bridge. Dynamic load comes from outside forces like wind and vibrations.
you did not give what frame of reference you are measuring this from. If you move up from a powered object in flight your air speed will fall off as air resistance acts as a brake on your ballistic trajectory from a detailed outside perspective there will be a fast fall in airspeed as you enter the airflow region around the object and then a slower fall as you become independent and leave the region affected by the moving object.
The best a geologist can do is be honest about the likelihood of an earthquake occurring in that region. They can also advise homebuilders in earthquake-safe design and construction, and offer tips for earthquake readiness in existing homes.
It means that you have no particular pattern as to which you move, you are moving without any meaning as to why you are moving or how you are moving
What is the difference between the construction of a moving coil galvanometer and a ballistic galvanometer?
major disadvantage is that moving coil galvanometer is not suitable for a.c measurement
The weston type galvanometer is a moving coil galvanometer in which a pointer is attached to the coil for measuring deflection due to torque .
A moving iron galvanometer is used to intensify the magnetic field by reducing the length of air gap across which the magnetic flux has to pass.
Moving coil galvanometer is used to detect unknown resitance of the both ac or dc circuits :)deepak instrumentation engineerAnswerA 'galvanometer' is simply an instrument that detects and measures small currents; 'moving coil' describes its operating principle. A moving-coil galvanometer is a d.c. instrument; if subject to a.c., then it will simply vibrate as it will not be able to respond the the frequency (unless the frequency is very low, in which case, it will sweep back and forth in step with that frequency).The moving-coil principle is applied to other instruments, and can be used in the construction of multimeters. In the case of a multimeter, a rectifier circuit is incorporated so that it can be used to measure a.c. currents and voltages.
it will not work
yes
a series resistence with its coil
A moving coil galvanometer is a type of scanning device used in the transportation and trucking industry. The vehicle is pulled through a fixed scanner while an operator watches a closed circuit television.
moving coil galvanometer
A galvanometer can be converted into a voltmeter by connecting it with very high resistance.
Moving coil galvanometre is a device which is used to detect current in a curcuit.