condensate,bleed line of all condensate
bleed is amount of steam output from turbine through pipe and exit from final stage of turbine . this bleed enter to feed water heater (low and high) and deaereator to increase unit efficiency or rather bleed is the amount of steam drained out of the steam turbine during the expansion of steam and this rejected heat energy is used to heat the feed water supplied to the boiler...........
In regenerative cycle LP/HP heaters are used to raise condensate/feed water temperature by extracting/bleed steam from LP and Hp stages of steam turbine in order to improve the efficiency of the plant
Bleeding of steam means Extracting steam from Turbines for heating the feed-water. Normally, there are High Pressure Heaters & Low Pressure heaters in Condensate cycle. Steam bleed out from the turbine gets into these heaters and heats up the feed-water (generally termed as Sensible Heat Addition). The steam that was bled can be re-used as condensate in Deaerators. Steam Extractions although reduce net work output but helps in overall gain in efficiency in terms of Reduced Fuel Consumption.
When steam contains liquid droplets while doing work at high temperatures, the water droplets can etch metal. To combat this, steam can be superheated or the pressure of the system is reduced.
If it's overfilled, it'll bleed itself through the pressure relief cap. If you're talking about burping the system, leave the radiator cap off, put the engine into high idle, and let it run until you notice steam coming out of the coolant reservoir.
The future tense of bleed is will bleed.
When you bleed brakes it is necessary to bleed each caliper in turn.
Dogs bleed the same way people bleed. When they have a cut or any other injury that breaks the skin they will bleed.
It's normal to bleed and not to bleed. It differs for people.
i didnt bleed.
If you don't bleed, you don't have a period. You can't have a period and not bleed.