0
A continuous rattling sound as of hard objects falling or striking each other.
Wiki User
∙ 7y ago
Wiki User
∙ 11y agoThe shiny ocean that is called sea world?
Add your answer:
Earn +20 pts
What is kitchen sink music?
Probably music that is made using the clinks and clatters of washing things in the kitchen sink. Not sure though...:/
How can you tell if your timing is bad?
Depends on the car. Mark your present timing place. Then advance timing until it clatters(spark knocks) then retard it until it does not. Vehicle will have a miss while running, usaually getting worse at higher rpms Depends on the car. Mark your present timing place. Then advance timing until it clatters(spark knocks) then retard it until it does not.
What is the rocker adjustment on a 1967 Impala SS 327 They are a little noisy?
With the engine at operating temperature back off the rocker arm until it slightly clatters. Tighten it down slowly until the valve is quiet and then tighten it 3/4 of a turn more.jd
What are some similes for the feeling of rain?
The student hit the fire alarm to make them rain upon the school.
What is the timing degree for a 1964 327?
The timing setting given is the most common for the 327. If, during a test drive, the engine seems a little sluggish, you can move the timing up two degrees to "6 BEFORE." If the engine clatters when you accelerate, move the timing down towards the "0" by two degrees.
Why would an '86 Honda Accord LXI rattle as you accelerate after stopping?
Hey Twlia==It may be the gas yoou are running or the timing too fast. Try running 93 octane gas and see if it dquits. If it does, you may want to have the timing checked. If the timing is ok, unless it clatters all of the time, I wouldn't worry with it. GoodluckJoe
What are the torque specs for tightening down my rocker arms on a '86 Chevrolet 305?
Most Chilton's, Motor's, or Haynes book should include detailed instructions on how to adjust the valves. With the engine running, back off the rocker nut until it clatters. Tighten it back down until the clatter is gone then tighten it 1/2 turn more. Any tighter will possible cause it to run rough or miss.
What are some eight letter words with 1st letter C and 4th letter T and 5th letter T and 6th letter E?
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 13 words with the pattern C--TTE--. That is, eight letter words with 1st letter C and 4th letter T and 5th letter T and 6th letter E. In alphabetical order, they are: chattels chatters chattery chitters clatters clattery clitters clotters clutters cluttery coattend coattest critters
How were candles used to tell the time?
A candle clock is a thin candle with consistently spaced markings (usually with numbers), that when burned, indicate the passage of periods of time. While no longer used today, candle clocks provided an effective way to tell time indoors, at night, or on a cloudy day. A candle clock could be easily transformed into a timer by sticking a heavy nail into the candle at the mark indicating the desired interval. When the wax surrounding the nail melts, the nail clatters onto a plate below.
What are some eight letter words with 1st letter C and 2nd letter L and 4th letter T and 6th letter E and 7th letter R?
According to SOWPODS (the combination of Scrabble dictionaries used around the world) there are 6 words with the pattern CL-T-ER-. That is, eight letter words with 1st letter C and 2nd letter L and 4th letter T and 6th letter E and 7th letter R. In alphabetical order, they are: clatters clattery clitters clotters clutters cluttery
How do you adjust rocker arms on a 99 Tahoe with a 350?
Run the engine until it reaches operating temperature. Remove one valve cover. Use a socket wrench . There are gizmos that you can put on the end of the rocket arms to help with the mess. start the engine. Loosen one rocker stud nut until it clatters. Slowly tighten the stud until the clatter stops. Now tighten the stud nut. 3/4 turn 1/4 turn at a time. repeat this for the rest of the rocker arms. Replace the cover and repeat on the other side. Expect a mess.
How do you adjust the valves on your 327 Chevy impala 1963?
Warm up engine. With the valve cover removed, loosen one rocker arm at a time until it clatters. Now, slowly tighten that rocker arm until it stops and give it a 1/4 turn. Go to the next one. That's it. You'll make quite a mess that way, but it will work if you don't mind oil all over yourself and the car. Check out the article I wrote on this topic for the details on how to do this without the engine running. http://www.classiccarauto.com/impala/how_to/adjust_valves.shtml
