0
not a clue
a
A: It all depends on the thyristor. There are no calculation involved not until you look up the thyristor specifications and decide on the load of the thyristor then you may calculate or more likely choose.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How thyristor used in induction furnace?
Thyristor is used for Rectifiying and inverting the power supply in induction furnace. The parallel Resonance Coils (Current Control Furnaces) Control the Furance power up to 40% by controlling the firing angle of the rectifier inverter and remaining 60% controlled by inverter thyristor control. In rectifier they are varying the thyristor firing angle from 15 deg to 45 deg. (in sin wave)
What is the function of thyristor?
Thyristor is a kind fast acting switch. These are fully controlled switches
What are the application of a thyristor?
The industrial applications of a thyristor are:To trigger a triacTo produce gate signalsto be used for controlled rectification
What is the switching speed of thyristor?
25microsec
Power thyristor how to check?
A thyristor is a rectifier semiconductor between two electrodes that permit unidirectional flow in anodes and cathodes.The flow of the current can be switched by a gate electrode that controls main driven electrical devices.To check a thyristor the current flow (between emitter/collector terminals) is checked.Then a small base current is applied to see if the thyristor functions as a switch.
What is mean of fire angle?
the fire angle is the angle at which the thyristor starts working...
How thyristor used in induction furnace?
Thyristor is used for Rectifiying and inverting the power supply in induction furnace. The parallel Resonance Coils (Current Control Furnaces) Control the Furance power up to 40% by controlling the firing angle of the rectifier inverter and remaining 60% controlled by inverter thyristor control. In rectifier they are varying the thyristor firing angle from 15 deg to 45 deg. (in sin wave)
What is conduction angle in SCR?
The conduction angle in an SCR is the phase angle relative to the power line at which point the gate is fired to commit the anode to conduct to the cathode. By varying the conduction angle, you can change the average power transferred by the SCR.
Why thyristor is called latching device?
once the gate has triggered conduction between cathode and anode, the gate has no further control; conduction will continue until power is removed from the cathode to anode circuit.
How do you change the conduction angle in scr?
You change the conduction angle in an SCR by delaying or advancing the point in time that you fire the gate.
Why a UJT is not a thyristor?
Because to remain in conduction it requires a supply of emitter current. Without a minimum value of emitter current it can't stay in the on position. Most thyristors do not require gate current after they are turned on to remain in conduction
What is firing angle in thyristors?
A sinusoidal AC waveform is divided up into 360 degrees, with the positive half and the negative half of the waveform combined into a kind of circle. The firing angle simply refers to the point on the waveform, as measured in degrees (thus 'angle') which the thyristor is triggered into conduction. Answer2: Firing angle is the phase angle of the voltage at which the scr turns on. There are two ways of turning an scr on..one is by applying a gate current or by applying a voltage across the scr until it becomes greater than the breakover voltage.... Answer3: Thyristor need gate current and voltage to make it conduct. The firing angle is the sinusoidal increasing voltage. As it rises a voltage is reached with enough power to fire to trigger the gate. That voltage is the angle considering that a sinusoidal is 360 degrees per cycle.
What are types of thyristor?
Types of thyristor firing art
Turn off and turn off mechanism of thyristor?
The turn off and turn off mechanism of a thyristor can be best explained by the gate turn-off thyristor. The thyristor uses the reverse bias mechanism.
How does a thyristor function?
A thyristor is a semiconductor device which acts as a switch.
What is the function of thyristor?
Thyristor is a kind fast acting switch. These are fully controlled switches
What does forced commutation mean?
The term "Forced commutation" is used when a thyristor is turned off using external components. If a thyristor is used in a DC circuit, when first turned on, it will stay on until the current goes to zero. To turn off the thyristor it is possible to use a Forced commutation circuit. The circuit creates a reverse voltage over the thyristor (and a small reverse current) for a short time, but long enough to turn off the thyristor. A simple circuit consist of a precharged capacitor and a switch (e.g. another thyristor) parallel to the thyristor. When the switch is closed, the current is supplied by the capacitor for a short while. This cause a reversed voltage over the thyristor, and the thyristor is turned off.
