0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What the working principle of super pressure Trapezium Grinding mill?
Our super pressure trapezium grinder mill has got the CE Certificate. Super pressure trapezium grinder mill is the new grinder mill. Super pressure trapezium grinder mill is researched and designed by our experts basing on long term experience of high pressure suspension grinder study, and the Super pressure trapezium grinder mill is according to number of customers' using requirement and suggestion home and aboard. Super pressure trapezium grinder mill is that it owes five patented technologies as trapezium working surface, flexible connection, roll linked pressure boost, etc. Super pressure trapezium grinder mill is also equipped with high efficiency centrifugal induced draught fan and so Super pressure trapezium grinder mil makes this machine research an advanced level of powder manufacture. Super pressure trapezium grinder mil is mainly consist of main engine, speed reducer, powder concentrator, induced draught fan, bag dust collector, piping device, integrator, and motor etc. And Super pressure trapezium grinder mill also can grind all kinds of nonflammable and non -explosive minerals whose Moh's hardness is lower than 9 and humidity is lower than 6%.
Difference between mild steel and high tensile steel?
About a decade ago, a consortium of thirty-five steel companies worldwide undertook a massive programme to design, build, and test an UltraLight Steel Auto Body (ULSAB).W-1. ULSAB proved to be lightweight, structurally sound, safe, executable and affordable. One of the major contributors to the success of the ULSAB was a group of new steel types and grades called Advanced High Strength Steels (AHSS) (or ultra high-tensile steel). The main reason to utilize AHSS is their better performance in crash energy management, which allows one to down gauge with AHSS. In addition, these engineered AHSS address the automotive industry's need for steels with higher strength than conventional mild steels and enhanced formability. The DP (Dual phase) and TRIP (Transformation induced plasticity) steels may provide additional stretchability (but not bendability) compared to conventional steels such as HSLA steels within the same strength range. The CP (Complex phase) and MS (Martensitic) steels extend the strength range while maintaining the same formability. While the ULSAB proved these AHSS provided a major benefit to the automotive industry, these steels reacted differently from traditional higher strength steels in forming and assembly. Worldwide working groups within the WorldAutoSteel organization created the AHSS Application Guidelines (See the link below) to explain how and why AHSS steels were different from traditional mild and higher strength steels in terms of press-forming, fabrication, and joining processes for automotive underbody, structural, and body panels designed for higher strength steels.
How do you weld 4140 steel?
Preparation: Ensure the 4140 steel workpiece is clean and free of any contaminants, rust, or scale. Place the workpiece in a heat-resistant container or fixture that allows for uniform heating and cooling. Heating: Preheat the furnace or kiln to the annealing temperature, which is typically around 1600°F (871°C) for 4140 steel. Insert the workpiece into the preheated furnace. Make sure it is supported and positioned to ensure even heating. Allow the steel to soak at the annealing temperature for a sufficient amount of time to ensure uniform heating. The soak time may vary but can be in the range of 1 to 2 hours.
What are the industrial uses of ultrasonic waves?
CLEANING Cleaning was one of the earliest industrial applications of ultrasonics. Objects to be cleaned are placed in a bath of fluid which is violently agitated by a number of ultrasonic transducers. The fluid may be water or solvent based, depending on the application. Traditionally the transducers were fitted around the walls of the cleaning bath, but some modern equipment uses an external transducer attached to a resonant probe which transmits the vibrations to the fluid. The ultrasonics may affect the cleaning process in several ways. Rapid movement in the fluid can help to de-wet surfaces, overcoming surface tension, and may also help to dislodge dirt particles and carry them away from the surface. Cavitation is probably the most interesting (and potent) effect - the shock waves generated by tiny implosions of vapour bubbles can be devastating at close range. The bubbles are so tiny that they can penetrate even the smallest crevices, making the process ideal for parts which could not be cleaned by other methods. Note also that the process must be well controlled to minimise erosion of the surfaces of the parts being cleaned. The standard test of ultrasonic intensity in a cleaning bath is to immerse a standard foil strip for a set time, then remove it and count the number of holes! CUTTING Imagine a knife which moves itself backwards and forwards in a sawing action, thirty thousand times a second. True the distance moved is very small but the acceleration is so high that nothing can move with the blade or stick to it. Ultrasonic scalpels are used by surgeons where they want to cut without exerting any pressure. In industry ultrasonic cutting tools are used for products that are difficult to cut by other means. The heat generated by the ultrasonic vibrations can also be useful. Some man-made fabrics are cut and simultaneously sealed using ultrasonic knives to prevent fraying. ULTRASONIC MACHINING Ultrasonics have been used in several ways for machining metals. Lathe tools may benefit from deliberately-induced vibrations to prevent "chatter" which compromises the surface finish of the finished component. Ultrasonic drills, used on very hard ceramics, work by grinding or eroding material away - a liquid slurry around the drill bit contains loose hard particles which are smashed into the surface by the vibrations, eroding material away and creating more loose hard particles METAL FORMING My own experience of power ultrasonics is mainly in this field. CarnaudMetalbox R&D (now a part of Crown Cork and Seal - the biggest packaging company in the world) and Loughborough University developed a new aerosol can using a number of novel metal-forming processes, starting with ultrasonic necking (i.e. reducing the diameter of the can at one end). The advantage of using ultrasonics in this case was to minimise friction between the can and the die, thus reducing the forming force. Without ultrasonics the force was so high that the can body would buckle and collapse during the necking process. With ultrasonics a 30% reduction in can diameter could be achieved in a single operation (in conventional necking processes the maximum is typically about 5%). The ultrasonics were only effective when the vibrations were perpendicular to the surface - for a cylindrical can this meant developing a round die that would vibrate in the radial direction. As with other high-power applications, all tooling had to be resonant, so the desired mode of resonance was a uniform hoop expansion / contraction. We quickly found that while it was fairly easy to design a die to resonate in this mode at the frequency of the ultrasonic equipment, excluding other modes of vibration was a major challenge! Another difficulty was that with the whole die expanding and contracting there was no convenient nodal (stationary) point which could be used for mouning it. This was solved by the use of a tubular mounting system which was itself resonant at the same frequency as the die. The ultrasonic forming process went into production making small-diameter aerosol cans in a UK factory. The production line still runs intermittently, making promotional packaging for several prominent customers. One of its products ("Fleurs de Paris" parfum deospray can) won a silver in the 1997 Metal Packaging Manufacturers Association awards. METAL WELDING . Ultrasonics can be used to weld different metals together, without solder and flux or special preparation. The process is different to plastic welding in that the two components are vibrated parallel to the interface. This is a more intuitively logical method of generating friction between them, but frictional heating is not thought to be the prime mechanism of the process - the temperature needed to melt (or even soften) most metals would be very difficult to achieve. Instead the mechanism is thought to be diffusion-bonding: atoms of each part diffuse into the other when the two surfaces are brought together in close contact. The ultrasonics promotes this close contact by breaking down the surface oxide layers, allowing the "raw" metals to make contact. The process has some limitations. It is only suitable for relatively small components (a prime example is welding connectors to car battery leads) since the power required to weld larger parts would be higher than can practically supplied by this method. Also the process tends to mark and deform the components, since high clamping forces and sonotrodes with serrated working faces must be used to grip the workpiece firmly. PLASTIC WELDING Plastic welding is used for a huge variety of products ranging from blister packs, cartons and small consumer goods up to car fuel tanks and dashboards. It works by generating heat exactly where it is needed - at the interface between the components to be joined. The components are clamped between a vibrating sonotrode and a fixed mounting. Strangely, the vibrations are usually applied perpendicular to the contact surface, although much of this vibration may be converted to in-plane movement. This also has the advantage that the clamping pressure will keep the sonotrode in contact with the component - serrated surfaces are generally not required. Best results are achieved when the components are clamped close to the interface ("near-field" welding) but if this is not possible then the process can still work at a distance ("far-field"). Staking, or insertion, is a variation of this process in which a metal part (generally a threaded bush) is driven into a hole in a plastic component, which then solidifies around it to form a permanent join. This is a convenient method of producing strong tapped holes in a plastic part. More information: SIEVING Industrial sieves are normally agitated at low frequency to help the product to distribute itself evenly over the surface and to help the small particles go through. Vibrating the mesh at ultrasonic frequencies (in addition to this low-frequency oscillation) can improve the rate of flow dramatically, preventing the product from blocking the holes in the mesh and helping to separate the small particles from the large. SINTERING The powder-metallurgy process is used to manufacture top-quality steels and other metals. The powder must be packed as closely as possible before the sintering process begins to prevent the formation of voids or other weaknesses in the finished product. Published research papers indicate that a significant increase in the packing density can be achieved using ultrasonics. Can anyone confirm that this process is in production?
Define Agricultural Intensification?
defination of agricultural intensification
What is the definition of population intensification?
Population = How many people are living in an area Intensification = To become intense or more intense, create more So, Population Intensification = more people
What was the importance of intensification in the Neolithic age?
Intensification in the Neolithic age was important as it led to the development of agriculture and animal domestication. This allowed societies to produce more food, leading to population growth, settlements, and social complexity. Intensification also contributed to the transition from hunter-gatherer lifestyles to settled agricultural communities.
What part of speech is intensification?
Intensification is a noun that refers to the action or process of making something stronger, more extreme, or more noticeable.
What is intensification?
the action that makes something stronger or extreme
What does Agricultural intensification mean?
Agricultural intensification is a process used to change the style of agriculture in the country. It is used to create more inputs and outputs in a certain area of agriculture.
What is resource intensification?
Resource intensification refers to an increase in the time and energy devoted to obtaining food, usually within a pre-agricultural population. It is often regarded as a precursor to agriculture.
What word means a Sudden recurrence or intensification of a disease?
paroxysm
What is a name given to sudden recurrence or intensification of a disease?
proxism
What is the meaning of intensification?
The act or process of intensifying, or of making more intense.
What development led to an intensification of the Portuguese involvement in the African slave trade?
Sugar Plantations
What is the noun of intensify?
The noun forms of the verb to intensify are intensifier, intensification, and the gerund, intensifying.
