Basically, one cylinder isn't firing for one of a number of reasons. The most common cause is an igntion fault. This will cause the engine to feel and sound "lumpy", and the power would be greatly reduced. The best way to find the cylinder which is responsible is quite simple but care must be taken. Firstly if you hate electric shocks as much as I do, find a proper pair of electricians insulated pliers, and even some decent rubber gloves if you can aswell. Start the engine, and one at a time, use the pliers to remove a lead from the top of one spark plug, if the engine almost stops, or gets worse in any way, it is not that piston which isn't firing. Repeat the proccess, one at a time, you will know which piston ISNT firing when you remove the plug lead, and there is no change in the engine sound, this is your defective cylinder. Its just a case then of looking at the condition of the spark plug and asessing the cause of the misfire before carrying out repairs. BEWARE:- THE LEADS WHICH CONNECT TO THE SPARK PLUGS CARRY SEVERAL THOUSANDS OF VOLTS - HENCE RUBBER GLOVES AND INSULATED PLIERS
Buy a new car.
It has a 6 cylinder motor also known as a V6 I do not think it can run only on 3 cylinders.
It depends upon cylinder in car. 3 ignition coils - 3 cylinder engine. 4 ignition coils- 4 cylinder engine.
4 cylinder firing order is usually 1-3-4-2.
Take it to your local garage and have them fix it.
THE machine consists 3 major cylinders, Plate cylinder, Blanket cylinder and impression cylinder
There are cars that have engines with only ( 3 ) engine cylinders such as : The Chevrolet Metro with the 1.0 liter , 61 cubic inch , 3 cylinder engine ( 1999 )
I have already checked and it is not the distributor cap, spark plugs or wires. The car was running fine last night and was on 3 cylinders this morning. Any information would help. Thanks!
no it will still add fuel to the other(s) contaminating oil and will gall the cylinder where the ring is running dry generating extra heat possibly causing seizure as well and or breakage. The only type to drive in this manner is one that is built with 3 cylinder function
Standing in front of the car looking at the engine the cylinders are numbered from right to left 1-2-3-4.
poorly
Well, based on my research, the average Horsepower delivered from a 3 cylinder engine is around 180 to 200, on average. It would also depend on the car it is going into and furthermore, with fewer cylinders you must remember that you must worry about increased surface area per cylinder surface damage from friction and subsequently heat. Fewer cylinders means increased cylinders to make up the difference to be able to move a car and distribute the force.