Want this question answered?
Cut in voltage (Knee voltage): The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage.
IN IN = 1N: Refers to the number of junctions (1N= 1 junction). O= Germanium, A= rectifier diode, so OA = germanium rectifier diode.
Cut-in voltage is the value of voltage at which appreciable current begins to flow when a pn junction is forward biased.
it means the entrance point of a diode
Diffusion capacitance is the capacitance due to transport of charge carriers between two terminals of a device. - Amog This diffusion capacitance is due to depletion capacitance which is a function of forward bias applied to emitter junction of a transistor and due to diffusion capacitance which a function of transconductance of the transistor. Its value is 100 pF. Tirupanyam B.V
The 1 stands for number of semiconductor junctions The N means it's a semiconductor diode
The town which is located at the center of other surrounding towns then it is called junction town.
A step graded junction is the pn junction in which impurity concentration does not change abruptly from donor to acceptor but varies smoothly
Node is Connecting point in Botany; junction is often used in Railway or Traffic parlance Vengrai
Driving wildly, with little regard for safety. Driving wildly, with little regard for safety.
static resistance: This is measured when diode id forward biased and input is a D.C signal. The ratio of voltage applied to the current flowing through diode gives static resistance Dynamic resistance : this is measured when input is A.C signal. since A.C signal varies continuously the resistance offered also changes continuously. the ratio of change in voltage to change in current gives dynamic resistance.
If you meant the word "forward":Move forward a bit please.I will forward this email.If you meant the word "foreword":The foreword in this book is very touching.I was asked to write a foreword for a popular anthology.