A transducer converts a form of energy to another form (usually voltage). e.g. A Current Transducer would read a current, and output a range of voltage that's related to the current. A voltage transducer is used when the voltage is too high or too low to be detected. A voltage transducer essentially transforms the voltage signal to something readable (e.g. Transforming 0~1000V to 0~5V)
no
poles are partially magnetized this causes some voltage called residual voltage
Cut-in voltage is the value of voltage at which appreciable current begins to flow when a pn junction is forward biased.
It means electricity power
Cut in voltage (Knee voltage): The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage.
the voltage which is mainly applied to primary side of the transformer is called rated voltage.Answer'Rated voltage' is the nominal voltage at which an electrical device has been designed to operate.
Deadliest metal band on the planet
If meant ac signal then it is grounded so that the reference voltage is 0 & we get +ve voltage.
Small signal amplifiers are generally referred to as "Voltage" amplifiers as they convert a small input voltage into a much larger output voltage.
luo converter is a new technique adopted for dc to dc voltage lifting(dc voltage boosting)...
In a transformer, the primary coil is the coil that has voltage applied to it. The secondary coil is the coil that we take voltage from. Transformers are used to step up voltage, step down voltage, or simply to isolate circuits.
Cutoff voltage is the point at which the battery is fully discharged. This is usually the point at which the device will shut itself off.