Honda Civic
Honda Civic EX
Honda Civic LX

What is proper lug nut torque for a 98 Honda civic ex?

242526

Top Answer
User Avatar
Wiki User
Answered
2006-05-06 00:05:33
2006-05-06 00:05:33

80 ftlbs

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


2008 Honda Civic lug nut torque specs are rated at 80 foot pounds. Improper torque set on a Civic can lead to the bolts seizing.

Proper lug nut torque spec for 2007 Honda Odyssey

the lug nut size on your Honda civic is a 19mm .....

It is 80 lb/ft. Do not torque any higher or you will warp the rotors.

You mean the lug nuts? 80 foot pounds if you mean that. Most Hondas are 80 for the wheel torque

It is 80 lb/ft and it is listed in your owner's manual.

It depends on the number of lugs per wheel your car has. Some cars have up to 5 lugs. Measure the torque by tightening with a wrench.

the Honda del sol is a civic so they do have the same lug pattern and offset

80 foot pounds. All current Hondas are 80 ft/lbs. http://www.8thcivic.com/forums/wheel-tire-upgrades/82370-tightening-torque-lug-nuts.html

2005 is 95ft/lb , earlier model are 80 ft/lb

http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfm

80 - 90 lbs on aluminum alloy wheels and 100 lbs on steel. Check torque after driving 30 miles.

The stock 1999 Honda Civic tires are: P185/65R14 85S I couldn't find the actual dimentions for the lug nuts but with this information you can find what you need.

Wheel lug nut torque is 80 lb/ft.

140 lb.ft ...its more than a civic.

The lug nut torque for a 1994 Honda Accord Wagon is approximately 80 ft pounds. It is important not to over tighten as the studs may break if mishandled.

80 foot pounds. Almost all Honda vehicles are 80 foot pounds.

The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.

The lug nut pattern is the same - 100mm x 4.

It is 80ft/lb. That is straight out of my manual. Table of contents look under "wheel,nut". This will take you to the section on changing a flat tire. It goes through the procedure then tells you to torque to 80ft/lb.

It is probably a 19mm. The best way to find out is to go to the parts/hardware store and thread the lug nut onto a bolt and which ever size bolt it fits that will be the size of the lug nuts.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.