In signal processing, sampling is the reduction of a continuous signal to a discrete signal. A common example is the conversion of a sound wave (a continuous signal) to a sequence of samples (a discrete-time signal).
Oversampling is part of signal processing. It is the process of using a sampling frequency that is higher than the Nyquist rate to sample a signal.
600 bauds per second
if the sampling rate is twice that of maximum frequency component in the message signal it is known as nyquist rate
32 kHz
repetition rate of signal
impedance. An analogue signal, does not have a data, or sample, rate.
slew rate is the ability of an amplifier to reproduce amplified version of the input signal in terms of frequency and phase. The input signal amplitude change is fast. But the amplifier will take some time to give response to the changes in input signal. i.e. how fast the amplifier tracks the input signal is the slew rate. For an amplifier the slew rate should be high in order to avoid signal distortion. The rate of change of the output voltage of an amplifier for the given input signal change is called the slew rate.
You must sample at 2 x the rate of the analog signal (2 x the analog signal frequency).
56Kbps. ----
Repetition rate of an AM envelope refers to the frequency of the modulating signal thus the shape of the envelope is identical to the shape of the modulating signal.
In signal processing, sampling is the reduction of a continuous signal to a discrete signal. A common example is the conversion of a sound wave (a continuous signal) to a sequence of samples (a discrete-time signal).
Rest
i think its 96000BPS
Upsampling is the process of increasing the sampling rate of a signal. For instance, upsampling raster images such as photographs means increasing the resolution of the image.In signal processing, downsampling (or "subsampling") is the process of reducing the sampling rate of a signal. This is usually done to reduce the data rate or the size of the data.
Amplitude Frequency
Oversampling is part of signal processing. It is the process of using a sampling frequency that is higher than the Nyquist rate to sample a signal.