all reactive elements in the amplifier, including stray capacitances and inductances.
Here is qn excellent article that explains step by step: http://MasteringElectronicsDesign.com/how-to-derive-the-instrumentation-amplifier-transfer-function/
All amplifier typically exhibit a band-pass frequency response. The cut off frequency in the low end is usually determined by the coupling band bypass capacitor .and the high frequency limit is typically determined by internal capacitances in the transistor itself.
It's an op amp (operational amplifier) with a linear response, meaning that double the input means double the output.
Quite simply, it's an amplifier wherein the stages as set up so that the output of one stage is coupled directly into the input of the next stage without any wave shaping or tuninig components between them. This makes for fairly flat frequency response. A link is provided to the Wikipedia article on direct coupling.
Exciter Power amplifier Input filter/amplifier Demodulator Audio processor
frequency response curve helps us to find the bandwidth of particular amplifier circuit. Bandwidth is the range of frequency at which the amplifier works better....
all reactive elements in the amplifier, including stray capacitances and inductances.
Here is qn excellent article that explains step by step: http://MasteringElectronicsDesign.com/how-to-derive-the-instrumentation-amplifier-transfer-function/
Try adding a adding a capacitor.
With the proper converters, any amplifier has the capability of connecting a stereo to a television. A simple step-by-step guide of instructions can be found on the domain name "About."
A: An amplifier operates withing its open loop response a negative feedback insure that the amplifier remains in its linear region. therefore reducing effects of saturation, storage time to name a few.
If the square wave gets distorted a lot, then the frequency response is not good.To get more precise data, you really should not use square waves; since you want the frequency response, you need to test how the amplifier reacts to pure waves (sine waves) of different frequencies.
Stagger Tuned Amplifiers are used to improve the overall frequency response of tuned Amplifiers. Stagger tuned Amplifiers are usually designed so that the overall response exhibits maximal flatness around the centre frequency.It needs a number of tuned circuit operating in union. The overall frequency response of a Stagger tuned amplifier is obtained by adding the induvidual response together. Since the resonant Frequencies of different tuned circuits are displaced or staggered, they are referred as STAGGER TUNED AMPLIFIER.The main advantage of stagger tuned amplifier is INCREASED BANDWIDTH. Its Drawback is Reduced Selectivity and critical tuning of many tank circuits. They are used in RF amplifier stage in Radio Receivers.
antigen
I don't believe the response time of a stepper motor depends on the step angle.
When transformer is used in step up mode then we can use transformer as amplifire