The air gap is .016 - .030
compressor to engine 36 ft lbs
compressor to bracket 16 ft lbs
On some torque converters/flexplates the mounting holes are not evenly spaced.On some torque converters/flexplates the mounting holes are not evenly spaced.
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
The torque for the brake hose to the caliper mounting bolt is 35 ft. pounds. For the adapter mounting bolt it's 16 ft. pounds. For the adapter to the knuckle mounting bolt, the torque is 50 ft. pounds.
Fox Lake Racing P-51 Intake Manifold mounting bolt torque spec. is ( 18 lb-ft ) 25 Nm
The torque should be around 11 ft-pounds
The caliper mounting bolts, both in the front and in the rear, require 39N-m, or 28.9 ft-lbs of torque.
No. The recommended torque has more to do with how much force the fastener exerts than preventing it from coming out.
Torque specs for brake caliper bolts 2005 mazda 6
34mm
bolt torques for front callipers slide and mounting
33- Ft lbs.
75 ft lbs