YouQ=?
Soundcard. It is a direct analog connection to audio out.
A CD/DVD Rom drive is connected by either connecting an IDE or SATA data and power cable to the drive, the other end of the data cable is connected the a slot on the motherboard and the power cable already comes out of the PSU.
The CD ROM connects to the computer via a ribbon cable.
DVD ROM drives can be connected using a USB connector/interface or installed in the computer using a Serial ATA connector (or if you computer is old an ATA connector if you can find an ATA DVD drive).
If your phone has a USB connection then you can plug it into a computer. Insert the disc you want the audio from into the cd-rom drive of the computer. Transfer the files from the disc's storage to the phone's storage.
Either SCSI or IDE (PATA).
That's so the PC can play music from the CD drive. If the little cable is not there, the only way to listen to an audio track from that drive is to use headphones.
The CD ROM does not have any affect on the speed of the CPU or the speed of the Frontside Bus. The CPU and Frontside Bus is what carries data and the CD ROM is not connected nor involved with the speed of the computer.
A cd ROM is a compact disc read-only memory and is a CD that can be read by a computer with an optical drive. ROM means the data on the cd is read-only or cannot altered or erased. They have a larger capacity, and can hold up to 700 MB. And can store many types of data. A cd r is used for writing music or data files to once CD-Rs work on machines that are marked as digital audio recordable machines, in computer drives marked as compact disc recordable, and in CD and DVD players that are compatible with CD-Rs.
disconnect all power. unplug all electrical cables from the back of the computer and press the power button. Remove the rear or side of the computer to see the inside. Locate the cd drive. Unplug the CD-ROM unit's cable from the main system board. The connection can be a thin ribbon-like cable with a bar-shaped connector that plugs into the rear of the CD-ROM unit. The cable may look like a small tube-like cable, as well. Take the power cable from the back of the CD-ROM. Use a screwdriver to remove any screws. Slide the cd- drive out and put the new one in the same place. attach the existing cables and plug the power cable in. reattach the rear or side computer panel and return the power.
If I was to purchase a computer that is a average desktop computer how much RAM and Rom should I have?
1. Copy the music and burn it on a CD rom (best way) 2. Use a direct audio cable and plug on the car audio auxiliary input hole (if there is) 3. Change the car audio equipment with mp3 reader or Bluetooth receiver, (costly and hard to configure)