the dealer should be able to cut a new key using the vin number
You can swap a 1997 Mustang V6 into a 1968 Mustang. You will need to make several modifications to the 1968 Mustang.
Check the resistor pack on the evaporator case under the hood
Heater CORE, not coil. The core is plugged and needs back flushing or replacement.
locationof backup switch 1997 mustang
There is no 1997 5.0 mustang. Do you mean 4.6L or 3.8L
The 1997 Ford Mustang GT was rated at 215 horsepower
No, it will not.
You have to take out the center console and the entire dash. This is atleast a 4-8 hour job depending on how good you are. The heater core is on the inside of the dash on the passenger side.
how do u replace the lower ball joint on a 1997 ford mustang
The 3.8 liter V6 engine in a 1997 Ford Mustang is rated at : ( 150 horsepower from the factory )
How do i change the heater core on a 1997 ford e150
the tire size for on a 97 mustang is17
pats module 1997 mustang location?
how to replace a heater core in a 1997 Chevy blazer
How do you remove the heater core on a 1997 Toyata Corolla?
Your local auto parts store has replacement ends for that. They also have the tools to help you remove the fitting from the heater inlet/outlet tube.
The 1997 Ford Mustang fuel tank has a 15 gallon capacity.
1997 cobra's have 305 horsepower. have a book on every mustang and cobra's ever built and specs.
The 1997 Ford Mustang came standard with a five-speed manual or an optional four-speed automatic
where is the heater control valve for a 1997 ford expedition
Yes, the 1996 and 1997 are the same body style so this should work fine.
i need instructions on changing a heater core on a 1997 Oldsmobile achieva
1997 van aerostar front heater blower guide