There are two stages in the disease process. The first stage is during the active Leptospira infection and is called the bacteremic or septicemic phase. The bacteremic phase lasts from three to seven days and presents as typical flu-like symptoms.
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
single phase, double phase & three phase
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
For information about three phase electrical services see the answers to the Related Questions shown below.
The second stage, or immune phase, occurs either immediately after the bacteremic stage or after a 1-3 day symptom-free period. The immune phase can last up to one month. During the immune phase, symptoms are milder but meningitis is common.
The later symptoms of jaundice and kidney failure together with the bacteremic phase symptoms suggest leptospirosis. Blood samples will be tested to look for antibodies to Leptospira interrogans.
Leptospirosis can be diagnosed and treated by doctors who specialize in infectious diseases. During the bacteremic phase, the symptoms are relatively nonspecific. This often causes an initial misdiagnosis because many diseases have similar symptoms.
s phase
mobile phase is the phase that consist of the analyte and stationary phase is the phase that is standstill
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
single phase, double phase & three phase
g2 phase
Game phases? If you mean the phases for a turn in Yu-Gi-Oh then here they are: Draw Phase Standby Phase Main Phase 1 Battle Phase Main Phase 2 End Phase
Phase to phase, two wire is classed as single phase. If the voltage from the phase to phase match the device's operating voltage, then connecting the device will allow it to operate.
S-phase (synthesis phase) is the part of the cell cycle in which DNA is replicated, occurring between G1 phase and G2 phase.
In three phase: I = (three phase VA) / (sqrt(3) x (phase to phase voltage)) for single phase: I = (single phase VA) / ((phase to neutral voltage)) keep in mine three phase VA = 3 x (single phase VA), and phase to phase voltage = 1.732 x (phase to neutral voltage) Therefore the single phase and three phase currents are the same (ie, the three phase currents are the same in all three phases, or balanced). But don't get available current and available power confused (KVA is not the same as KW).