Want this question answered?
The best way would be to unplug the swimming pool filter, open the drain valve on your pool filter turn the pump back on and drop the water level to the desired level about 2 inches above the skimmer.
What is the best way to get rid of rough spots on pool steps??
.......In a pool???
Dilute it... No other way
The only way to remove Hardness is to partially drain and refill your pool.
Pool coping should be level. If it is "bullnose" brick they should all be about the save height all the way around the pool. A cantilever coping should be level as well. there should be no toe stubbers.
They are used to help level the pool. It also helps the pool to be straight or the way it is supposed to be made or designed.
A good way to see if you have a leak in your pool is to # take a bucket and fill it with water from your pool. # mark it at the water level. # mark the pool at the water level. # wait a few days if there is no leak in the pool then the water level in the bucket should have reduced by the same amount as the water level in the pool, however if the water level in the pool has gone down more then the water level in the bucket you have a leak in the pool or in the pipes around the pool.
If you build up a level area to place your pool you will have no problems. If you place the pool on the ground the way it is your water level will only be as high as the lowest side of your pool.
The same way as if you asked how doy you level my yard for a pool,or a shed... try wording it as if you want to put up a shed or pool and there are a zillion answers out there
recakle
The best way to fix holes in a mesh pool cover is to sew it. If the holes are too large for this you should consider just replacing it.