a 440 engine will fit but you have to use motor plates to secure it into the body and any 4 speed from a 383 or 440 will work.
Depends on the engine and transmission
Could be a transmission problem, assuming an automatic transmission.
The transmission codes and functions are often controlled by the ecm, engine control module computer. The ecm stores the fault codes from the engine and transmission. It is telling you that you have a transmission problem, the vehicle must have the ecm scanned by a certified technician, to properly diagnose the problem.
depending on which engine you got the base swinger with the slant 6 was around $2,800.
It all depended on what engine was in the dart, there were 2 differen't trannies.
It means you have a transmission problem. Seek professional help.
That means there is a problem in the emissions system are the transmission and other places too. You need to have the engine scanned with an engine scanner to see were your problem is.
You will have to get a engine scanner and scan the engine. And it will give you the trouble code or codes, and then fix the problem. The computor is seeing a problem in the engine system or transmission system. Need to repair.
If an engine transmission light comes on in the dashboard there can be a potential problem with the drive-train. The engine's computer should receive a diagnostic to determine if there is anything wrong with the transmission.
There is a problem with the emmission system are transmission and the computer turns the engine light on to let you know there's a problem. Have engine scanned with a OBDII engine scanner.
NO. A knocking noise in the engine is a problem in the engine.
Your statement is a little inconclusive. Will the transmission shift when the engine is turned off, but not shift when the engine is running? If it is jammed and refusing to move even with the engine off, the problem will be inside the gearbox and usually related to the selector forks and or rods. If the the problem is there only when the engine is running the problem will be related to the clutch assembly, which is failing to disengage the gearbox from the engine