0
What is the bolt size for an exhaust manifold in a Daewoo Leganza?
Wiki User
∙ 15y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Daewoo leganza head bolt torque tightening pattern?
I need a picture of a leganza deawoo head bolt tightening patern
You have replaced your exhaust system with a new one up to the exhaust manifold the exhaust manifold looks fine but you still get loud engine noise inside the car?
have you checked to see if there is any broken bolt on the manifold, or worped manifold, burnt manifold gasket
What is the torque spec for the exhaust manifold on a 95 Honda Odyssey?
The 1995 Honda Odyssey exhaust manifold bolt torque specification is 45 pounds. The exhaust manifold bolts should be torqued in 15 pound intervals.
Can you use a a turbo exhaust manifold off of a 4g63 on a 420a?
It will bolt on, but to answer your question, no.
Exhaust manifold bolt torque ford 460?
28-33 ft lb
What is Chevy 454 exhaust manifold bolt torque install sequence?
40 lbs
1979 Gmc 350 exhaust bolt torque?
Exhaust manifold torque is 25 lb/ft with anti-seize lube.
Where can I find a free Daewoo Leganza service manual?
i have the full Daewoo Leganza Service Manual on CD-DVD Rom, it has every nut and bolt, every fault code, every thing you need to know about the Leganza is in this workshop service manual, I can burn a copy on cd-dvd rom for any one interested for 10.00 pound plus S.A.E. IF ANY ONE WANTS A COPY E-MAIL diomcs11@ntlworld.com.
What is the head bolt torque sequence for a 2001 Daewoo Leganza?
25nm then 3 lots of 90 degrees,10 head bolts,starting in the middle tighten in turn, middle bolt on exhaust side,bolt opposite on intake side,bolt on immediate right intake side bolt opposite on ex side,then Bolton immediate left of the first bolt tightened then bolt opposite on intake side,and so on so as you work outwards in a crcular motion,tighten all 10 to 25nm first and then 90 degrees in turn 3 times.
Must you remove the exhaust manifold to get a broken bolt out of the flange that connects to the engine?
The broken bolt can be blown out by someone who knows how to use a torch - muffler-shop
Why wont the exhaust manifolds bolt to your new motor?
Be sure the heads and manifold bolt patterns match. If they do not match you'll either have to find a set of heads that have a matching bolt pattern or look for a set of exhaust manifolds that have a bolt pattern to match your heads. I speak from experience as I once had to change over my exhaust manifold for the very reason that the bolt patterns did not match up. redneck72 - you may need a manifold strethcer... when changing the manifolds on to my new 383 strocker in my 81 3/4 4x4. I had the smae problem, so i went to napa and i bought this tool called a "manifold strether" in spreads it so it cathes all six stud holes.
What are the bolt torque values for the exhaust manifold to Y pipe on a 95 Astro Van 4.3L?
It should be about 45 ftlb
