2"
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
You will need a ratchet and a socket to remove it. You get under the rear of the truck and you will see the bolt and bracket holding the tire in place. Remove the bolt and the bracket hinges downward. You will need a ratchet and a socket to remove it. You get under the rear of the truck and you will see the bolt and bracket holding the tire in place. Remove the bolt and the bracket hinges downward.
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
I have a 2003 Escape and it took a 7 mm socket.
Remove the big round plastic plug and use a 15mm socket to remove the bolt....That's it
Bolts are categorised by their thread size. The standard socket size for a bolt with a three quarter inch thread is 1 and one eighth inches. Heavy head bolts use a one and a quarter inch socket.
probably 3/8"
3/8ths
It is a 33mm socket you will me to remove the nut
My 2.9L uses a T50.
7 mm. You can buy this.
Remove the bolt in the back middle of the seat-- 10mm socket will be needed,with a extenition, donot try to remove the fingers in the front of the seat before removing the 10 mm bolt -- a six sided 10 mm socket will work the best. billy